IGEPv2

Industrial Processor board SINGLE core ARM Cortex-A8 + DSP C64P up to 1000 MHz

IGEPv2 is an industrial processor board. It unleashes laptop-like performance and expandability without the bulk, expense or noise of typical desktop machines and is the perfect solution for many industrial applications or system requirements.

Features
Processor	DM3730, by Texas Instruments ARM Cortex-A8 NEON SIMD Coprocessor Frequency speed 1000 MHz TMS320C64+ DSP 800 MHz
3D/2D Accelerator	PowerVR SGX GPU, providing 2D/3D graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and Open VG support
Video	Video acceleration: H.264, H.263, MPEG-4, MPEG-2, JPEG, WMV9 and additional codecs. Video encoder/decoder up to 720p.
Memory	RAM: Up to 512 MB Mobile DDR (Standard setup 512 MB) Flash: Up to 512 MB (Standard setup 512 MB) Onboard micro-SD card socket
Ethernet	10/100 Mbps Ethernet PHY Interface
USB	1 x USB 2.0 Host 1 x USB 2.0 OTG
Display	1 x DVI-D/HDMI Resolution 2048 x 2048 – 24 bits
Image Capture Interface	1 x CPI interface (12 bits)
Wireless	WiFi IEEE 802.11 b/g/n (Access Point: Yes) Bluetooth v4.0 (BLE)
Antenna	1 x Internal WiFi/Bluetooth antenna 1 x U.FL connector for external antenna (Optional)
Additional Interfaces (Other combinations available, see Hardware Manual for more information)	2 x I2C 1 x MMC (No WiFi version) 1 x McBSP/I2S/SSI (Digital Serial Audio Interface) 3 x SPI 39 x GPIO (Maximum number of GPIOs) 1 x PWM 3 x UART (RS232 and RS485 interfaces available) 1 x Stereo Line Audio In mini jack 1 x Stereo Line Audio Out mini jack
SW Support	Linux Android
Power Supply	Power from expansion connectors: 5 V Power from JST connector: 5 V Power from jack power: 5 V
Power Consumption	Typical 2,2 W (depending on software) Maximum 2,8 W (depending on software)
Thermal	Industrial temperature: -40 ºC to +85 ºC
Form Factor	65 mm x 95 mm
Humidity	93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF	> 100000 hours

Versions

Model	Description
IGEPv2 - RA	Internal use, OMAP3530 processor (2008)
IGEPv2 - RB	Initial IGEPv2 with OMAP3530 720Mhz (2009) and Marvell WIFI b/g & BT
IGEPv2 - RC	Compatible OMAP3530 and DM3730 (2011)
IGEPv2 - RD	N/A (Internal use)
IGEPv2 - RE	N/A (Internal use)
IGEPv2 - RF	DM3730 with new WILINK 8 module

Documentation

• IGEPv2 SoC: DM3730
• Datasheet
• Schematic (RC | RF )
• Mechanicals
• Software Manual
• Hardware Manual  ( RC | RF  )

Tutorials

If you are new with following concepts we recommend you to complete the tutorials in order !

1. IGEPv2 Boot Pin-out
2. How to prepare a ready to boot firmware
3. U-Boot Bootloader
4. Linux Kernel
5. Custom Firmware set-up
6. Boot from MicroSD Card
7. Boot from NAND/eMMC flash.
8. Update Installed IGEP Firmware

Firmware

Official

• Official IGEP Firmware

Custom Software

• Ubuntu Xenial 16.04 LTS ARM Hard Float
• Debian Stretch 9 ARM Hard Float
• Yocto Pyro ARM Hard Float
• Buildroot Skeltal ARM Hard Float

Guides

Getting started with IGEPv2

• Getting Started with IGEPv2

Ubuntu / Debian

• How To Set Up an NFS Mount on Ubuntu 16.04

Yocto

• How to use the Yocto Project to develop Embedded Linux