Difference between revisions of "IGEP COM MODULE"
From IGEP - ISEE Wiki
(→Firmware) |
|||
| Line 128: | Line 128: | ||
==Firmware== | ==Firmware== | ||
| − | === | + | ===Tutorials=== |
| − | * [[ | + | * [[The bootloader U-Boot|U-boot Bootloader]] |
| − | + | * [[Linux Kernel 4.9.y|Linux Kernel]] | |
| − | * [[ | ||
* [[How to prepare a bootable MicroSD Card|How to boot from MicroSD Card]] | * [[How to prepare a bootable MicroSD Card|How to boot from MicroSD Card]] | ||
* [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]] | * [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]] | ||
| Line 137: | Line 136: | ||
* [[IGEP Firmware Ubuntu]] | * [[IGEP Firmware Ubuntu]] | ||
* [[IGEP Firmware Debian]] | * [[IGEP Firmware Debian]] | ||
| − | * [[ | + | |
| − | * [[ | + | ===Documentation=== |
| + | * [[DM3730]] | ||
| + | * [[Pre-installed software on IGEP Processor Boards|Pre-installed_software_on_IGEP_Processor_Boards]] | ||
| + | * [[Update the PRE-INSTALLED software image to a current release|Update_the_PRE-INSTALLED_software_image_to_a_current_release]] | ||
===Software=== | ===Software=== | ||
Revision as of 10:35, 15 May 2018
Contents
[hide]Small module SINGLE core ARM Cortex-A8 up to 1000 MHz
The IGEP COM MODULE is an industrial processor board. It can be used as a computer-on-module for your product. The IGEP COM MODULE provides a lot of features in a small size. You can build your project anywhere you want.
Features | |
|---|---|
| Processor |
DM3730 / AM3703, by Texas Instruments |
| 3D/2D Accelerator | PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (Only in DM3730 version) |
| Video |
Video acceleration: H.264, H.263, MPEG-4, MPEG-2, JPEG, WMV9 and additional codecs. Video encoder/decoder up to 720p (Only in DM3730 version) |
| Memory | RAM: Up to 512 MB Mobile DDR (Standard setup 512 MB) Flash: Up to 512 MB (Standard setup 512 MB) Onboard micro-SD card socket |
| Ethernet |
No |
| USB |
1 x USB 2.0 Host (connector not included) |
| Display |
1 x Digital Video/TFT interface |
| Image Capture Interface | 1 x CPI interface (12 bits) |
| Wireless |
WiFi IEEE 802.11 b/g/n (Access Point: Yes) |
| Antenna |
1 x Internal WiFi/Bluetooth antenna |
| Additional Interfaces
|
4 x UART |
| SW Support | Linux Android |
| Power Supply | Power from expansion connectors: From 3,5 V to 4,2 V Digital I/O voltage: 1,8 V |
| Power Consumption | Typical 1 W (depending on software) Maximum 2 W (depending on software) |
| Thermal | Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC |
| Form Factor | 18 mm x 68.5 mm Gumstix compatible |
| Humidity | 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
| MTBF | > 100000 hours |
Options |
|
|---|---|
| Processor |
|
| Grade |
|
| Main Memory |
|
| Flash Memory |
|
| Wireless |
|
| 3D/2D Accelerator - Video |
|
Firmware
Tutorials
- U-boot Bootloader
- Linux Kernel
- How to boot from MicroSD Card
- Boot from NAND/eMMC flash.
- IGEP Firmware Yocto
- IGEP Firmware Ubuntu
- IGEP Firmware Debian
Documentation
- DM3730
- Pre-installed_software_on_IGEP_Processor_Boards
- Update_the_PRE-INSTALLED_software_image_to_a_current_release
