Difference between revisions of "IGEPv5"
From IGEP - ISEE Wiki
(→Firmware) |
|||
| Line 117: | Line 117: | ||
==Firmware== | ==Firmware== | ||
| − | === | + | ===Tutorials=== |
| − | * [[ | + | * [[The bootloader U-Boot|U-boot Bootloader]] |
| − | + | * [[Linux Kernel 4.9.y|Linux Kernel]] | |
| − | * [[ | ||
* [[How to prepare a bootable MicroSD Card|How to boot from MicroSD Card]] | * [[How to prepare a bootable MicroSD Card|How to boot from MicroSD Card]] | ||
* [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]] | * [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]] | ||
| Line 126: | Line 125: | ||
* [[IGEP Firmware Ubuntu]] | * [[IGEP Firmware Ubuntu]] | ||
* [[IGEP Firmware Debian]] | * [[IGEP Firmware Debian]] | ||
| − | * [[ | + | |
| − | * [[ | + | ===Documentation=== |
| + | * [[AM335x]] | ||
| + | * [[Pre-installed software on IGEP Processor Boards|Pre-installed_software_on_IGEP_Processor_Boards]] | ||
| + | * [[Update the PRE-INSTALLED software image to a current release|Update_the_PRE-INSTALLED_software_image_to_a_current_release]] | ||
===Software=== | ===Software=== | ||
Revision as of 10:33, 15 May 2018
Contents
[hide]Processor board DUAL core ARM Cortex-A15 up to 1,5 GHz
IGEPv5 is an embedded processor development board based on Texas Instruments OMAP5432 Multimedia Application Device and up to 4 GB DDR3 RAM. This board is designed to evaluate performance and features for advanced industrial applications. This board supports expandability via onboard connectors.
Features |
|
|---|---|
| Processor |
OMAP5432, by Texas Instruments |
| 3D/2D Accelerator | 2D GC320 Core from Vivante® Corp Graphics Accelerator 2D/3D Dual Core POWERVR SGX544 Graphics Accelerator |
| Video |
DSS Video Display Subsystem (WUXGA) |
| Memory | RAM: Up to 4 GB DDR3 Flash: 8 GB eMMC Onboard micro-SD card socket |
| Ethernet |
10/100/1000 Mbps Ethernet PHY Interface |
| USB |
4 x USB 2.0 Host |
| Display |
HDMI 1.4a (with audio), micro HDMI connector |
| Image Capture Interface | 1 x MIPI CSI interface (5 lanes) / 1 x CPI interface (16 bits) |
| Wireless |
WiFi IEEE 802.11 b/g/n |
| Antenna |
1 x Internal WiFi/Bluetooth antenna |
| Additional Interfaces |
5 x I2C |
| SW Support | Linux Android |
| Power Supply | Power from jack power: 5 V |
| Power Consumption | Typical 3 W (depending on software) Maximum 6 W (depending on software) |
| Thermal | Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC |
| Form Factor | 135 mm x 95 mm |
| Humidity | 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
| MTBF | > 100000 hours |
Options |
|
|---|---|
| Processor |
|
| Grade |
|
| Main Memory |
|
| Flash Memory |
|
| Wireless |
|
Firmware
Tutorials
- U-boot Bootloader
- Linux Kernel
- How to boot from MicroSD Card
- Boot from NAND/eMMC flash.
- IGEP Firmware Yocto
- IGEP Firmware Ubuntu
- IGEP Firmware Debian
Documentation
- AM335x
- Pre-installed_software_on_IGEP_Processor_Boards
- Update_the_PRE-INSTALLED_software_image_to_a_current_release
