IGEPv5

Processor board DUAL core ARM Cortex-A15 up to 1,5 GHz

IGEPv5 is an embedded processor development board based on Texas Instruments OMAP5432 Multimedia Application Device and up to 4 GB DDR3 RAM. This board is designed to evaluate performance and features for advanced industrial applications. This board supports expandability via onboard connectors.

Features
Processor	OMAP5432, by Texas Instruments 2 x ARM Cortex-A15 2 x ARM Cortex-M4 Frequency speed up to 1,5 GHz for Cortex-A15 Frequency speed up to 200 MHz for Cortex-M4 TMS320DMC64x DSP core
3D/2D Accelerator	2D GC320 Core from Vivante® Corp Graphics Accelerator 2D/3D Dual Core POWERVR SGX544 Graphics Accelerator
Video	DSS Video Display Subsystem (WUXGA)
Memory	RAM: Up to 4 GB DDR3 Flash: 8 GB eMMC Onboard micro-SD card socket
Ethernet	10/100/1000 Mbps Ethernet PHY Interface
USB	4 x USB 2.0 Host 1 USB OTG 3.0 Port
Display	HDMI 1.4a (with audio), micro HDMI connector 2 x MIPI DSI (5 lanes) 24-bit Parallel Display Interface
Image Capture Interface	1 x MIPI CSI interface (5 lanes) / 1 x CPI interface (16 bits)
Wireless	WiFi IEEE 802.11 b/g/n Bluetooth v4.0 (BLE)
Antenna	1 x Internal WiFi/Bluetooth antenna 1 x U.FL connector for external antenna
Additional Interfaces	5 x I2C 2 x MMC (one used into onboard micro_SD socket) 3 x McBSP/I2S/SSI (Digital Serial Audio Interface) 2 x SPI 30 x GPIO 7 x PWM 5 x UART 1 x RTC battery 1 x SATA II 1 x Audio Headset
SW Support	Linux Android
Power Supply	Power from jack power: 5 V
Power Consumption	Typical 3 W (depending on software) Maximum 6 W (depending on software)
Thermal	Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC
Form Factor	135 mm x 95 mm
Humidity	93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF	> 100000 hours

Options
Processor	OMAP5432, by Texas Instruments 2 x ARM Cortex-A15 2 x ARM Cortex-M4 Frequency speed up to 1,5 GHz for Cortex-A15 Frequency speed up to 200 MHz for Cortex-M4
Grade	Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC
Main Memory	1GB DDR3 4GB DDR3
Flash Memory	8 GB eMMC
Wireless	No WiFi/Bluetooth WiFi IEEE 802.11 b/g/n Bluetooth v4.0 (BLE)

Documentation

• IGEPv5 SoC: OMAP5
• Datasheet
• Mechanicals
• Software Manual
• Hardware Manual

Tutorials

If you are new with following concepts we recommend you to complete the tutorials in order !

1. IGEPv5 Boot Pin-out
2. How to prepare a ready to boot firmware
3. U-Boot Bootloader
4. Linux Kernel
5. IGEP Firmware set-up
6. Boot from MicroSD Card
7. Boot from NAND/eMMC flash.
8. Update Installed IGEP Firmware

Firmware

Official

• Official IGEP Firmware

Custom Software

• Ubuntu Xenial 16.04 LTS ARM Hard Float
• Debian Stretch 9 ARM Hard Float
• Buildroot ARM Hard Float

Guides

Getting started with IGEPv5

• Getting started with IGEPv5

Ubuntu / Debian

• How To Set Up an NFS Mount on Ubuntu 16.04

Yocto

• How to use the Yocto Project to develop Embedded Linux