646
edits
Changes
From IGEP - ISEE Wiki
no edit summary
Where each file shows the result of each measurement, in this particular case it was measured a fixed target at a 3.9 meters distance from the radar.
NOTE that it tooks takes about 9ms time to take make each measurement.
NOTE also that the file names with the ADC captured data are not generated. They are only generated if you add the command -w
Now you can check the measurement results in the generated measure20.txt file, and you will see something like this:
Position Speed Level Dtime filename<br> [m] +/-0.5 [Km/h] +/-3 . [ms] .<br> 34.8 -1 875 27 V70D99999A00.<br><br> 4.8 -1 874 7 V70D99999A01.<br> 4.8 -1 868 9 V70D99999A02.<br> 4.8 -1 417871 9 V70D99999A03.<br><br> 27 V70D99999A00 4.8 -1 866 9 V70D99999A04.<br> 4.8 -1 866 9 V70D99999A05.<br> 4.8 -1 861 9 V70D99999A06.<br><br> 4.8 -1 866 9 V70D99999A07.<br> 4.8 -1 861 9 V70D99999A08.<br> 4.8 -1 861 9 V70D99999A09.<br><br> 34.8 -1 860 9 V70D99999A10.<br> 4.8 -1 414867 9 V70D99999A11.<br> 4.8 V70D99999A01 -1 870 9 V70D99999A12.<br><br> 34.8 -1 870 9 V70D99999A13.<br> 4.8 -1 422870 9 V70D99999A02V70D99999A14.<br> 34.8 -1 871 9 V70D99999A15.<br><br> 4.8 -1 423873 9 V70D99999A03V70D99999A16.<br> 4.8 -1 875 9 V70D99999A17.<br> 34.8 -1 876 9 V70D99999A18.<br><br> 4.8 -1 414876 9 V70D99999A04V70D99999A19.<br><br>
NOTE that it tooks takes about 9ms time to take make each measurement.<br>
NOTE also that the file names with the ADC captured data are not generated. They are only generated if you add the command -w<br>