646
edits
Changes
From IGEP - ISEE Wiki
no edit summary
Example 2: You want to capture 20 consecutive measurement results into a file named measure20.txt. In addition you want to use a modulation sweep time of 1,15ms and you also want to generate a file of the ADC captured data for each measurement. Then, in this case, you must prompt the next command line:
./radar -T 1150 -m 5 20 -w >measure5measure20.txt<br>NOTE: Remember you must be in the "radar" directory and you must execute "radar_init.sh" at least once before start doing measurements. <br>
Position Speed Level Dtime filename<br> [m] +/-0.5 [Km/h] +/-3 . [ms] .<br> 3.9 1 417 27 V70D99999A00.<br><br> 3.9 1 414 8 V70D99999A01.<br> 3.9 1 422 9 V70D99999A02.<br> 3.9 1 423 9 V70D99999A03.<br><br> 3.9 1 414 9 V70D99999A04.<br>