|
|
| (42 intermediate revisions by 4 users not shown) |
| Line 1: |
Line 1: |
| − | == Booting your IGEPv2 board<br> ==
| + | #REDIRECT:[[What can I do with IGEPv2]] |
| − | | |
| − | First of all, you may want to boot your board. IGEP0020 can boot:
| |
| − | | |
| − | *from a [[How to boot from MicroSD Card|MMC/microSD card]] (first priority in boot order).
| |
| − | *from OneNAND memory.
| |
| − | | |
| − | <br>
| |
| − | | |
| − | The IGEPv2 board boot process is divided in '''3 booting phases''':<br>
| |
| − | | |
| − | #[[The bootloader X-loader|xloader]] boot process (It's not possible to interact with the board).
| |
| − | #[[The bootloader U-Boot|uboot boot]] process (It's possible to interact with the board using the console).
| |
| − | #[[The Linux kernel|Linux Kernel]] starting process (It's possible to interact with the board using the console when the kernel has already started).<br>
| |
| − | | |
| − | == Logging in<br> ==
| |
| − | | |
| − | IGEPv2 board uses the serial debug for output all debug information and the users can interact with the board. | |
| − | | |
| − | Now that you have set up the system is correctly configured you are ready to login. You can do it via:
| |
| − | | |
| − | *Serial Console: [[Using serial debug port to communicate|here]] is a short explanation about how to correctly configure your Serial Console<br>
| |
| − | *SSH
| |
| − | | |
| − | The default login user is: root
| |
| − | | |
| − | There is no password for this user.
| |
| − | | |
| − | == Using the board LED's<br> ==
| |
| − | | |
| − | This is probably the most simple feature in the board, but sometimes LED's may be the only way of checking the status of some of your applications.<br>
| |
| − | | |
| − | IGEP0020 has 4 LED's which you can control, for example, using 'echo':
| |
| − | <pre>echo 1 > /sys/devices/platform/leds-gpio/leds/d240\:green/brightness
| |
| − | | |
| − | echo 1 > /sys/devices/platform/leds-gpio/leds/d240\:red/brightness
| |
| − | | |
| − | echo 1 > /sys/devices/platform/leds-gpio/leds/d440\:green/brightness
| |
| − | | |
| − | echo 1 > /sys/devices/platform/leds-gpio/leds/d440\:red/brightness
| |
| − | </pre>
| |
| − | You can turn them down using the same command and write '0' instead of '1'.
| |
