Using IGEP WLAN to communicate
From IGEP - ISEE Wiki
|
In this guide is used IGEP firmware Yocto |
Contents
Overview
If your IGEP Processor Board has WIFI interface you can connect to it without any cable. You can open a SSH session in your computer and interact with your Board from your console. Here is how to.
Requirements
There are some requisites to follow this guide:
- IGEP Processor Board with WIFI
- Host computer with WIFI
- PuTTy program
Connect to IGEP network
Follow these steps to connect to your IGEP device:
- Click on the Network Manager Tray icon.
- Select IGEP_<xx> network, where <xx> is different for every IGEP device, to connect.
|
|
Click to enlarge image
Connect to IGEP
Follow these steps to get a remote shell prompt:
- Open PuTTy program
- Host Name:192.168.6.1
- Port: 22
- Connection type: SSH
- Click Open, accept Security Alert and login as root user
|
|
|
|
Click to enlarge image
Note that a DHCP IP address in range 192.168.6.10-192.168.6.254 should be given to your host PC. The IGEP device should have IP address 192.168.6.1.
Troubleshooting
NFS in root filesystem
Don't use NFS in root filesystem combined with WIFI
