User:Pau pajuelo

From IGEP - ISEE Wiki

Revision as of 18:13, 18 January 2013 by Pau (talk | contribs) (→‎IGEP COM Boards)

Jump to: navigation, search

TODO:

Categorize new tutorials

How to manage the kernel modules on Linux

How do I edit my kernel command line

Basic Software instructions

POWER CONSUMTION MEASUREMENTS

IGEP devices power consumtion measurements

under construction

IGEPv2 Boards

ISEE PRODUCT IGEP v2
MODEL IGEP0020-RC5 IGEP0020-RC5 IGEP0020-RC6 IGEP0020-RC6
Other Flash memory boot SD Card boot Flash memory boot SD Card boot
Details DM3730 (Numonix) (NO WIFI) DM3730 (Numonix) (NO WIFI) DM3730 (Micron) (WIFI) DM3730 (Micron) (WIFI)
CPU speed: 1Ghz 400 mA (IDLE)
470 mA (CPU 100%) 		400 mA
470 mA 		510 mA
580 mA 		510 mA
570 mA
CPU speed: 800Mhz 380 mA
430 mA 		380 mA
430 mA 		490 mA
540 mA 		490 mA
530 mA
CPU speed: 600Mhz 360 mA
390 mA 		360 mA
390 mA 		470 mA
500 mA 		460 mA
490 mA
CPU speed: 300Mhz 330 mA
350 mA 		330 mA
350 mA 		440 mA
450 mA 		430 mA
450 mA
CPU speed: 1Ghz
(Suspend system) 		110 mA 110 mA 200 mA 200 mA
CPU speed: 300Mhz
(Suspend system) 		100 mA 100 mA 190 mA 190 mA
Ethernet cable connected +60 mA +60 mA
Disable Ethernet
(Reset Ethernet: gpio64=0) 		-60 mA (-120mA if Ethernet cable is connected) -60 mA (-120mA if Ethernet cable is connected)
Powered down DVI-D
(Reset DVI-D: gpio170=0) 		-70 mA -70 mA
Disable Bluetooth
(Reset BT. gpio137=0) 		- < -10 mA
Disable WIFI
(Reset WIFI. gpio138=0) 		- -80 mA
Disable DSS, USB and Audio -60 mA -60 mA
Led consumtion 35 mA (x4 LEDs) 35 mA (x4 LEDs)

IGEP COM Boards

ISEE PRODUCT IGEP COM ELECTRON IGEP COM MODULE
MODEL IGEP0030-RE80 IGEP0030-RE80 IGEP0030-RE7 IGEP0030-RE6 IGEP0030-RE6
Other Flash memory boot SD Card boot Flash memory boot Flash memory boot SD Card boot
Details AM3703 (Hynix) (NO WIFI) AM3703 (Hynix) (NO WIFI) DM3730 (Micron) (NO WIFI) DM3730 (Numonix) (WIFI) DM3730 (Numonix) (WIFI)
CPU speed: 1Ghz 200 mA (IDLE)
270 mA (CPU 100%) 		190 mA
250 mA 		210 mA
280 mA 		370 mA
440 mA 		370 mA
440 mA
CPU speed: 800Mhz 180 mA
230 mA 		170 mA
210 mA 		190 mA
240 mA 		350 mA
400 mA 		350 mA
400 mA
CPU speed: 600Mhz 160 mA
180 mA 		140 mA
170 mA 		170 mA
190 mA 		330 mA
360 mA 		330 mA
360 mA
CPU speed: 300Mhz 130 mA
140 mA 		110 mA
130 mA 		140 mA
150 mA 		300 mA
310 mA 		300 mA
310 mA
CPU speed: 1Ghz
(Suspend system) 		60 mA 60 mA 70 mA 250 mA 250 mA
CPU speed: 300Mhz
(Suspend system) 		50 mA 50 mA 60 mA 240 mA 240 mA
Ethernet cable connected +60 mA +60 mA
Disable Ethernet
(Reset Ethernet: gpio64=0) 		-60 mA (-120mA if Ethernet cable is connected) -60 mA (-120mA if Ethernet cable is connected)
Powered down DVI-D
(Reset DVI-D: gpio170=0) 		-70 mA -70 mA
Disable Bluetooth
(Reset BT. gpio137=0) 		- < -10 mA
Disable WIFI
(Reset WIFI. gpio138=0) 		- -80 mA
Disable DSS, USB and Audio -60 mA -60 mA
Led consumtion 35 mA (x4 LEDs) 35 mA (x4 LEDs)

igep.ini parameters

The kernel command line syntax is name=value1. These next parameters are supported in igep.ini since IGEP-X_Loader 2.4.0-2:

[kernel]

Parameter Name Description Default value Comments
kaddress Kernel copy address =0x80008000 Hex memory address
rdaddress Ram Disk location address =0x81600000 Hex memory address;
disabled by default
serial.low Serial number (low part) =00000001 Numeric
serial.high Serial number (high part) =00000000 Numeric
revision Revision ID =0003 Numeric
kImageName Kernel, binary image name =zImage Kernel or binary image name
kRdImageName Kernel RAM Disk Image Name - Ram Disk image name
MachineID Machine ID (kernel ID)  ;IGEPv2
=2344 		 ;Module
=2717
;Proton
=3203
Mode Boot Mode  ;Linux kernel
=kernel 		 ;Other image (like uboot)
[binary image]

[kparams]

Parameter Name Description Default value Comments
buddy Enable/disable expansion board support  ;IGEPv2 Expansion Board support
=igep0022 		 ;Berlin and Paris Expansion Board support
=base0010
New York Expansion
=ilms0015
console Setup the kernel console parameters =ttyO2,115200n8 -
earlyprintk Enable early printk - -
mem Setup the Board Memory Configuration =430M -
boot_delay Setup the boot delay =0 -
mpurate Setup ARM Processor Speed - -
loglevel Setup the loglevel - -
debug Enable kernel debug output - -
fixrtc Fix RTC variable - -
nocompcache Configure nocompcache variable =1 -
omapfb.mode Configure frame bugger configuration =dvi:hd720-16@50  ;Other configuration
=dvi:1280x720MR-16@60
vram Configure Video RAM assigned to every frame buffer - -
omapfb.vram Configure Video RAM assigned to every frame buffer - -
omapfb.debug Configure frame buffer debug output - -
omapdss.debug Configure DSS Video debug output - -
smsc911x.mac0 Configure Board Ethernet Mac Address =0xb2,0xb0,0x14,0xb5,0xcd,0xde For IGEP BERLIN
smsc911x.mac1 Configure Board Ethernet Mac Address =0xb2,0xb0,0x14,0xb5,0xcd,0xdf For IGEP BERLIN (only with IGEP PROTON)
smsc911x.mac Configure Board Ethernet Mac Address =0xb2,0xb0,0x14,0xb5,0xcd,0xde For IGEPv2, IGEP PROTON, IGEP PARIS and IGEP BERLIN
ubi.mtd Fot UBI FS boot - -
root Configure root directory for MMC, NFS or UBI  ;For mmc memory
=/dev/mmcblk0p2 rw rootwait 		 ;For flash memory
=/dev/mtdblock2
nfsroot For NFS boot - -
rootfstype For UBI FS boot - -
ip For NFS boot - -
init Assign init program - -
musb_hdrc.debug USB debug - -
musb_hdrc.use_dma USB over network - -
libertas.libertas_debug Configure libertas debug - -
board.ei485 Enable/disable RS485  ;Enable RS485
=yes 		 ;Disable RS485
=no
board.modem Enable/disable GPRS modem  ;Enable modem (IGEPv2 Expansion)
=no 		 ;Enable modem (IGEPv2 Expansion)
=yes
buddy.revision Enable hardware buddy revision [A or B] Only for base0010
=A 		Only for base0010
=B
Retrieved from "http://labs.isee.biz/index.php?title=User:Pau_pajuelo&oldid=8106"