User:Pau pajuelo
From IGEP - ISEE Wiki
Contents
TODO:
Categorize new tutorials
How to manage the kernel modules on Linux
How do I edit my kernel command line
Basic Software instructions
POWER CONSUMTION MEASUREMENTS
IGEP devices power consumtion measurements
IGEPv2 Boards
| ISEE PRODUCT | IGEP v2 | ||||
| Product name | IGEP COM PROTON | IGEP COM MODULE | IGEP COM ELECTRON | IGEPv2 | |
 |
 |
 |
 |
 | |
| Devices and interfaces | (discontinued product) | ||||
| ARM CPU | DM3730 1GHz | DM3730 1GHz | AM3703 1GHz | DM3730 1GHz | - |
| DSP | TMS320DM-C64+ 800 Mhz | TMS320DM-C64+ 800 Mhz | - | TMS320DM-C64+ 800 Mhz | - |
| RAM Memory | 512 MBytes / 200 Mhz | 512 MBytes / 200 Mhz | 256 MBytes / 200 Mhz | 512 MBytes / 200 Mhz | - |
| Flash Memory | 512 MBytes | 512 MBytes | 512 MBytes | 512 MBytes | - |
| MicroSD Card Reader | x 1 | x 1 | x 1 | x 1 | - |
| USB 2.0 Host | - | - | - | x 1 | - |
| USB 2.0 OTG | x 1 | x 1 | x 1 | x 1 | - |
| RS232 | - | - | - | x 1 | - |
| RS485 | - | - | - | x 1 | - |
| JTAG | x 1 | - | - | x 1 | - |
| Stereo audio In/Out | - | - | - | x 1 | - |
| DVI on HDMI | - | - | - | x 1 | - |
| Ethernet | - | - | - | x 1 | - |
| Wifi | - | x 1 | - | x 1 | - |
| Bluetooth | - | x 1 | - | x 1 | - |
| EEPROM | x 1 | - | - | - | - |
| S-Video | - | - | - | T.P. | - |
| Camera Interface | - | x 1 | - | N.P. | - |
| Analog to digital converter | - | - | - | N.P. | - |
| Keyboard matrix | - | - | - | N.P. | - |
| LEDs | x 3 green LEDs | x 2 bicolor LEDs | x 1 bicolor LED | x 2 bicolor LEDs | - |
| TFT Interface | - | - | - | x 2 | - |
| RTC Battery Back Up | - | - | - | x 2 | - |
| Size | 35x51,2mm | 18x68,5mm | 18x68,5mm | 65x95mm | - |
| Expansion connectors | Power and many functionalities from OMAP3 processor | Power and many functionalities from OMAP3 processor | Power and many functionalities from OMAP3 processor | Power 5V and 1.8V, UART, McBSP, McSPI, I2C, GPIO, RS485 with transceiver, Keyboard | - |
| Main pages | 
|
|
|
|
- |
|
|
|
| ||
| Getting started guide |
|
|
|
| |
| Hardware manual | 
|
|
|
|
- |
IGEP COM Boards
igep.ini parameters
The kernel command line syntax is name=value1. These next parameters are supported in igep.ini since IGEP-X_Loader 2.4.0-2:
[kernel]
| Parameter Name | Description | Default value | Comments |
| kaddress | Kernel copy address | =0x80008000 | Hex memory address |
| rdaddress | Ram Disk location address | =0x81600000 | Hex memory address; disabled by default |
| serial.low | Serial number (low part) | =00000001 | Numeric |
| serial.high | Serial number (high part) | =00000000 | Numeric |
| revision | Revision ID | =0003 | Numeric |
| kImageName | Kernel, binary image name | =zImage | Kernel or binary image name |
| kRdImageName | Kernel RAM Disk Image Name | - | Ram Disk image name |
| MachineID | Machine ID (kernel ID) | ;IGEPv2 =2344 |
;Module =2717 ;Proton =3203 |
| Mode | Boot Mode | ;Linux kernel =kernel |
;Other image (like uboot) [binary image] |
[kparams]
| Parameter Name | Description | Default value | Comments |
| buddy | Enable/disable expansion board support | ;IGEPv2 Expansion Board support =igep0022 |
;Berlin and Paris Expansion Board support =base0010 New York Expansion =ilms0015 |
| console | Setup the kernel console parameters | =ttyO2,115200n8 | - |
| earlyprintk | Enable early printk | - | - |
| mem | Setup the Board Memory Configuration | =430M | - |
| boot_delay | Setup the boot delay | =0 | - |
| mpurate | Setup ARM Processor Speed | - | - |
| loglevel | Setup the loglevel | - | - |
| debug | Enable kernel debug output | - | - |
| fixrtc | Fix RTC variable | - | - |
| nocompcache | Configure nocompcache variable | =1 | - |
| omapfb.mode | Configure frame bugger configuration | =dvi:hd720-16@50 | ;Other configuration =dvi:1280x720MR-16@60 |
| vram | Configure Video RAM assigned to every frame buffer | - | - |
| omapfb.vram | Configure Video RAM assigned to every frame buffer | - | - |
| omapfb.debug | Configure frame buffer debug output | - | - |
| omapdss.debug | Configure DSS Video debug output | - | - |
| smsc911x.mac0 | Configure Board Ethernet Mac Address | =0xb2,0xb0,0x14,0xb5,0xcd,0xde | For IGEP BERLIN |
| smsc911x.mac1 | Configure Board Ethernet Mac Address | =0xb2,0xb0,0x14,0xb5,0xcd,0xdf | For IGEP BERLIN (only with IGEP PROTON) |
| smsc911x.mac | Configure Board Ethernet Mac Address | =0xb2,0xb0,0x14,0xb5,0xcd,0xde | For IGEPv2, IGEP PROTON, IGEP PARIS and IGEP BERLIN |
| ubi.mtd | Fot UBI FS boot | - | - |
| root | Configure root directory for MMC, NFS or UBI | ;For mmc memory =/dev/mmcblk0p2 rw rootwait |
;For flash memory =/dev/mtdblock2 |
| nfsroot | For NFS boot | - | - |
| rootfstype | For UBI FS boot | - | - |
| ip | For NFS boot | - | - |
| init | Assign init program | - | - |
| musb_hdrc.debug | USB debug | - | - |
| musb_hdrc.use_dma | USB over network | - | - |
| libertas.libertas_debug | Configure libertas debug | - | - |
| board.ei485 | Enable/disable RS485 | ;Enable RS485 =yes |
;Disable RS485 =no |
| board.modem | Enable/disable GPRS modem | ;Enable modem (IGEPv2 Expansion) =no |
;Enable modem (IGEPv2 Expansion) =yes |
| buddy.revision | Enable hardware buddy revision [A or B] | Only for base0010 =A |
Only for base0010 =B |
