U-Boot 2013.07.y
From IGEP - ISEE Wiki
Revision as of 16:41, 26 July 2013 by Eballetbo (talk | contribs) (Created page with '__TOC__ = Introduction = The currently supported IGEP Processor Boards are as follows: * IGEP COM AQUILA (IGEP0033) The currently supported IGEP Expansion Boards are as follow…')
Introduction
The currently supported IGEP Processor Boards are as follows:
- IGEP COM AQUILA (IGEP0033)
The currently supported IGEP Expansion Boards are as follows:
- IGEP AQUILA EXPANSION (BASE0033)
Binaries: latest stable u-boot version is: 2013.07-0 (20130725)
Platform | Sources | SPL binary | U-Boot binaries |
---|---|---|---|
IGEP0033 | 2013.07-0 (md5sum) | MLO-2013.07-0.bin (md5sum) | u-boot-2013.07-0.img (md5sum) |
Build u-boot from sources
Download the latest stable version sources and follow next steps:
wget http://downloads.isee.biz/pub/releases/uboot/v2013.07-0/u-boot-2013.07-0.tar.gz tar xzf u-boot-2013.07-0.tar.gz cd [u-boot version]
Also, it could download from GIT Repositories (http://git.isee.biz/) and test the last unstable version at your own risk (see "U-Boot Mainline Series" chapter in The bootloader U-Boot)
Configure U-Boot for IGEP COM AQUILA device.
make CROSS_COMPILE=[your cross compiler] igep0033_config
Then build the SPL and the u-boot image. The result will be an MLO file and an u-boot.img file in current directory. Execute:
make CROSS_COMPILE=[your cross compiler]
Known issues
Not for now
Changelog
- Release 2013.07-0
- First release for 2013.07.y series