Linux is an interesting environment to generate files of radar measurement results. If you are only interested to capture radar measurement results and you do not need data captured by the ADC here we present some examples on how to save measurement results into a file:
Example 1: You want to capture 5 consecutive measurement results into a file named measure5.txt. then you must prompt the next command line:
./radar -m 5 >measure5.txt<br> NOTE: Remember you must be in the "radar" directory and you must execute "radar_init.sh" at least once before start doing measurements.
NOTE: Remember you must be in the "radar" directory and you must execute "radar_init.sh" at least once before start doing measurements.<br>
Now you can check the measurement results in the generated measure5.txt file, and you will see something like this:
Now you can check the measurement results in the generated measure5 Position Speed Level Dtime filename<br> [m] +/-0.txt file, and you will see something like this: 5 [Km/h] +/-3 . [ms] .<br> 3.9 1 417 27 V70D99999A00.<br><br> 3.9 1 414 8 V70D99999A01.<br> 3.9 1 422 9 V70D99999A02.<br> 3.9 1 423 9 V70D99999A03.<br><br> 3.9 1 414 9 V70D99999A04.<br> <br>
= Next Steps =
