0
edits
Changes
From IGEP - ISEE Wiki
m
|Community_MainPage={{#lst:Template:Links|IGEPv2_Community_MainPage}}
|Community_Guides_1={{#lst:Template:Links|IGEPv2_Community_Guides_1}}
|Community_Guides_2={{#lst:Template:Links|IGEPv2_Community_Guides_2}}
{| cellspacing="0" cellpaddingOverview ="5" border="1" align="center" style="text-align: left;"|-| bgcolor="#cccccc" colspan="3" | This first chapter describes '''IGEP Technology Devices Guides - Part 1/3 - Summaryhow to boot IGEPv2'''|-| [[Image:{{#lst:Template:Links|IGEPv2_Image}}|250px|center|link={{#lst:Template:Links|IGEPv2_Community_MainPage}}]] |-|1) and also gives some '''Connect a DVI Monitorbasic instructions'''about how to connect some peripherals.|-|2) #'''Connect a Serial cableDVI Monitor'''|-|3) #'''Connect Audio In/Out minijackan Ethernet network cable'''|-|4) #'''Connect USB devices (keyboard and mouse)'''|- |5) '''Connect network cable'''|-|6) #'''Power up IGEPv2 (5V DC)'''|} = Requirements = In this tutorial we are going to use the following peripherals: * IGEPv2 with its power supply* a monitor compatible with DVI-D* a network cable.* a USB keyboard and a mouse* a PC with Linux or Windows
This first chapter describes '''how to boot IGEPv2''' and also gives some '''basic instructions''' about how to connect some peripherals.
=== Setting up ===
----
First of all, you can begin to '''add some peripherals'''.
In this tutorial we are going to use:== Connect the monitor ==
* the serial cable''' Basic '''* a monitor* IGEPv2 has a USB keyboard and a mouse* '''HDMI connector''' with a network cable.'''DVI-D interface'''
Do NOT power up your board yetConnect IGEPv2 to a DVI-D compatible monitor.
{| cellspacing="0" cellpadding="5" border="1" align="center" width="100%" style="text-align: left;"|-| bgcolor="#cccccc" |'''MonitorKnow more '''|-|IGEPv2 has a '''DVI-D interface''' where you can connect a '''HDMI connector to a monitor'''.You will need a cable with '''male DVI-D connector''' for the monitor, and '''male HDMI connector''' from IGEPv2.|}
Note that your monitor should be able to support 1024 x 768 @ 60 Hz, which is the default resolution in the preinstalled software.
{| cellspacing="0" cellpadding="5" border="1" alignConnect a Keyboard & Mouse ="center" width="100%" style="text-align: left;"|-| bgcolor="#cccccc" |'''Serial'''|-|Connect an '''AT/Everex Cable''' to the '''10-pin serial header''' on IGEPv2 and a '''[http://en.wikipedia.org/wiki/Null_modem null modem] DB9 male-male''' serial cable between the board and your host machine.|}
In the preinstalled software, the serial port is configured as a '''Debug interfaceBasic '''.
You can use the debug interface Connect a USB hub to interact with the IGEP Processor operating system [host] by typing commands in a client machine USB type-A connector (your PC, for exampleUSB Host) to perform specific tasks. You can communicate and open a debug session via many interfaces such Serial port, Ethernet, Wifi, USB Ethernet Gadget, etcin IGEPv2.
Furthermore, if you connect an external device Then plug a USB keyboard and USB mouse to the serial port you will be able to see the '''Linux Kernel traces''', as the system bootsUSB hub.
Therefore, you will be able to access IGEPv2 with a '''serial console''' from your client device (for example, a PC with Linux, Windows, etc.)
[[Image:DSC 0177.JPG|thumb|550px|right|'''SerialKnow more ''': AT/Everex Cable connected to the 10-pin serial header on IGEPv2. '''Network''': Ethernet cable]]
To communicate with Only USB 2.0 devices will work in IGEPv2 via Serial port , so if you have to '''connect your client machine to any USB mouse 1.0 into the serial debug port''' in your IGEPv2 (USB host)connector without using a USB hub 2.0, it will not work.
Once you have set the cable, then you have to run a serial console, or any program that can interact with the serial port in your host machine, such Minicom, PuTTy (Linux, Windows), Terminal (Windows), etc.
* If you don't know how to set up your serial cable, refer to the following article: '''[[How_to_setup_the_IDC10_cable|How to setup == Connect the IDC10 Ethernet cable]]'''. Also, if you do not have Serial port in your host machine you might need a USB to Serial converter to communicate via this port.==
* If you are not familiar with a serial console, refer to this page, an extended article about '''[[Using serial debug port to communicate]]Basic '''.
{| cellspacing="0" cellpadding="5" border="1" align="center" width="100%" style="text-align: left;"|-| bgcolor="#cccccc" |'''AudioKnow more '''|-|Connect an '''external output audio device''' to the 3.5mm jack Audio Out connector in IGEPv2, such as external stereo powered speakers.|}
External Audio input devices, such as a powered microphone or the audio output of a PC or MP3 player, can be connected to the via a 3.5mm jack (Audio IN)IGEPv2 comes with one 10/100BASE-TX Ethernet ports.
{| cellspacing="0" cellpadding="5" border="1" align="center" width="100%" style="text-align: left;"
|-
| bgcolor="#cccccc" |'''Keyboard & Mouse'''
|-
| In IGEPv2 you might need a powered hub to connect to most USB.
Connect an '''USB hub to the USB host connector''' in your IGEPv2, and then plug your keyboard and mouse into the USB hub.
|}
'''Only USB 2.0 devices will work''' in IGEPv2, so if you connect any USB mouse 1.0 into the USB host connector without using a USB hub 2.0, it will not work.== Power up ==
{| cellspacing="0" cellpadding="5" border="1" align="center" width="100%" style="text-align: left;"|-| bgcolor="#cccccc" |Once you have connected the peripherals '''Networkyou can apply power'''|-| Plug an '''Ethernet cable''' between to your IGEPv2 and your client machine (or any other network device with ethernet connectivity5V DCC).|}
IGEPv2 comes with one 10/100BASE-TX Ethernet ports. ''' Know more '''
In When you power up your board, you will also see how two red LED's light up while the system boots (the following chapters we sequence will use ethernet to access IGEPv2 with IP configuration, send filesbe different based on software version). After a few seconds, etcthere is a fixed green led on.
{| cellspacing="0" cellpadding="5" borderTest the Demo software distribution ="1" align="center" width="100%" style="text-align: left;"|-| bgcolor="#cccccc" |'''Power up'''|-| Once you have connected the peripherals '''you can apply power''' to your IGEPv2 (5V DCC).|}
* '''SerialBasic ''': If you have connected the '''serial debug port''', you will see the system traces as the board is starting up. Finally you will see the boot prompt asking for login. (read the next chapter of this tutorial)
* '''LED's''': You will also see a few LED's flash in IGEPv2 during Finally, the system boot(desktop of the sequence preinstalled software will be different based appear on software version)the screen.
* '''Monitor''': Finally, if you connected the DVI-D signal (with HDMI connector) to a monitor, the desktop of the preinstalled software will appear on the screen and you will be able to You can use the mouse and the keyboard, if connectedto test the demo applications.
* '''USB devices''': You will be able to use your keyboard and mouse and 'play' with some features of this little distribution.
<br style="clear:both" />
[[Category:IGEP0020]]
[[Category:Work in progress]]
no edit summary
__NOTOC__
{{Table/IGEP Technology Devices| cellspacingTech_Family="0" cellpadding="5" border="1" align="center" width="100%" style="text-align{{#lst:Template: left;"Links|-IGEPv2_Tech_Family}}| bgcolorTech_ID="{{#cccccc" |'''IGEPv2 - Part 1/3'''|-|'''This tutorial is a starting point for IGEPv2.'''lst:Template:Links|IGEPv2_Tech_ID}} {{Navigation/IGEP Technology Guides
|Name={{#lst:Template:Links|IGEPv2_Name}}
|Image={{#lst:Template:Links|IGEPv2_Image}}
|ISEE_MainPage={{#lst:Template:Links|IGEPv2_ISEE_MainPage}}
|ISEE_Hardware={{#lst:Template:Links|IGEPv2_ISEE_Hardware}}
}}
= Getting started =
<div style="text-align: center;">
</div>
The Digital Visual Interface (DVI) is a video standard interface designed to provide very high visual quality on digital display devices such as flat panel LCD computer displays and digital projectors. It is partially compatible with the High-Definition Multimedia Interface (HDMI) standard in digital mode (DVI-D), and VGA in analog mode (DVI-A).
Note that your monitor should be able to support 1024 x 768 @ 60 Hz, which is the default resolution in the preinstalled software.
Plug an '''Ethernet cable''' between IGEPv2 and your client machine (or any other network device with ethernet connectivity).
In the following chapters we will use ethernet to access IGEPv2 with IP configuration, send files, etc.
''' Basic '''
{|
| [[Image:Poky-prompt-screenshot.png|thumb|550px|left|Poky prompt]] [[Image:Poky-screenshot.png|thumb|400px|right|Poky desktop]]
|}
{{Navigation/IGEP Technology Devices Guides/Next Step
[[Category:IGEP Technology Devices Guides]]
