Changes

By default, if <section begin=transclusion />If you power up your board have a brand new IGEP Processor Board you must know that '''it will run the software on the flash. But you can prepare comes with a MicroSD card firmware''' provided and boot from installed on it by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flashISEE.

If By default, if you have power up your board it will run the software on the flash. But '''you can prepare a brand new MicroSD card and boot from it''' by inserting it to the MicroSD card reader of your IGEP Processor Board you must know that it comes with a firmware provided and installed on , as it by ISEEhas more priority than the flash.

Therefore, when you power up your board it boots the The pre-installed software, which consists on a minimal '''Linux-based distribution ''' with a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.  If you want to update your pre-installed software, you can create a MicroSD card in your host PC with the latest sofwtare. Then boot your IGEP Processor Board from that MicroSD card.  Finally, you can write the updated software from the MicroSD to the flash memory on your IGEP device.<section end=transclusion />