Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

Pre-installed software on IGEP Processor Boards

904 bytes added, 17:14, 23 November 2011
no edit summary
(please contribute with this article)By default, if you power up your board it will run the software on the flash. But you can prepare a MicroSD card and boot from it by inserting it to the MicroSD card reader of your IGEP Processor Board, as it has more priority than the flash.
=IGEP COM MODULE=
If you have a brand new IGEP Processor Board you must know that it comes with a firmware provided and installed on it by ISEE.  Therefore, when you power up your board it boots the pre-installed software, which consists on a minimal Linux-based distribution with a lite X Window System and GNOME Mobile based applications created with Poky Platform Builder.  If you want to update your pre-installed software, you can create a MicroSD card in your host PC with the latest sofwtare. Then boot your IGEP Processor Board from that MicroSD card.  Finally, you can write the updated software from the MicroSD to the flash memory on your IGEP device. =IGEPv2See also=*[[Update the PRE-INSTALLED software image to a current release]]
[[Category:Work in progress]]
[[Category:Software]]
0
edits
Retrieved from "http://labs.isee.biz/index.php?title=Special:MobileDiff/2891"