1,381
edits
Changes
From IGEP - ISEE Wiki
Created page with '= IGEP Module Standalone = center IGEP Module don't require a baseboard for boot. You only must connect the OTG to your PC or use a HUB in this …'
= IGEP Module Standalone =
[[Image:IGEP_module.jpg|center]]
IGEP Module don't require a baseboard for boot. You only must connect the OTG to your PC or use a HUB in this way the module be configured as OTG Device.<br>
== Power the module without use the OTG and without baseboard. ==
WARNING: You can damange the module using this information, modify, manipulate or follow this how to can end with the lose of all warranty.
5V Input DC pad in the below image you can find the 5VDC pad. You must connect the positive (+) 5 VDC here.
[[Image:IGEP0030-VCC-Image-(1).jpg|thumb|center]]
Also you must find a GND pad, I suggest you use the OTG pads due it's enought big for solder your wire.
[[Image:IGEP0030-GND-Image(2).jpg|center]]
[[Image:IGEP_module.jpg|center]]
IGEP Module don't require a baseboard for boot. You only must connect the OTG to your PC or use a HUB in this way the module be configured as OTG Device.<br>
== Power the module without use the OTG and without baseboard. ==
WARNING: You can damange the module using this information, modify, manipulate or follow this how to can end with the lose of all warranty.
5V Input DC pad in the below image you can find the 5VDC pad. You must connect the positive (+) 5 VDC here.
[[Image:IGEP0030-VCC-Image-(1).jpg|thumb|center]]
Also you must find a GND pad, I suggest you use the OTG pads due it's enought big for solder your wire.
[[Image:IGEP0030-GND-Image(2).jpg|center]]
