Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

Getting started with IGEP MODULE

21 bytes added, 13:05, 22 November 2010
m
Introduction
== Introduction ==
This page describes how to use the USB device port of our [http://www.igep.es/index.php?option=com_content&view=article&id=109&Itemid=123 ISEE IGEP MODULE] with OMAP3 processor to communicate with USB port of your computer (or USB hub connected to your computer).
We should directly power the module board via the onboard USB OTG port and we only need use a USB cable (USB A type plug to mini B type plug).
The on-board HS USB OTG port is used as the default power input for IGEP MODULE standalone operating mode.
The on-board HS USB OTG port is used as the default power input for IGEP MODULE standalone operating mode.  <br>  Once the board is power up and running, we will get Ethernet connectivity over the USB OTG cable (USB Ethernet Gadget/RNDIS driver).  By default, the IGEP MODULE interface will have the IP address 192.168.7.2. <br>
Other available ways to communicate with IGEP MODULE are WIFI or Bluetooth on-board interfaces. But by default, they are not configured.
0
edits