4,199
edits
Changes
From IGEP - ISEE Wiki
m
→How to use Telit Modem
echo 0 > /sys/class/gpio/gpio141/value
</pre>
*Once the modem is on (Led D401 (, near SIM card reader) , is blinking now *Once the modem is on), you can interact with it via UART 2. You can use Microcom to comunicate with it from the serial debug console:
<pre>microcom -s 115200 /dev/ttyO1</pre>
*To check the modem status use the command:<br>
