0
edits
Changes
From IGEP - ISEE Wiki
no edit summary
The IGEP0030 COM connects to BASE0010 expansion board via the two 70-pin connectors located on the bottom side of the COM. Place the BASE0010 board on a flat, static-safe surface, align the COM with the white outline on the board above the connectors and gently press on the COM until it clicks into place.
{| |-| [[Image:BASE0010-01.JPG|frame|left]][[Image:BASE0010-02.JPG|frame|right]] |} <br style="clear:both" />
= Adding peripherals =
You will see a few lights flash, the details will differ based on software version. As the linux kernel loads and initializes the hardware, the desktop will appear on the screen like following image and you will see a boot prompt in your serial connection.
{| align="right"
|-
| [[Image:Poky-prompt-screenshot.png|frame|left]] [[Image:Poky-screenshot.png|frame|right]]
|}
<brstyle="clear:both" />
= The next step is: [[What can I do with BASE0010]] =
