Mux configuration
From IGEP - ISEE Wiki
Explanation
| Pad: | Connect to: | Default peripheral (mode=0) | Default function: | Other available peripherals: | Share with: | |
| 1 | VIO 1V8 | - | Power 1v8 | - | ||
| 2 | DC 5V | - | Power 5v | - | ||
| 3 | MMC2_DAT7 | MMC2_DAT7 | Reset Wlan |
MMC2_CLKIN(mode=1) MMC3_DAT3(mode=3) GPIO_139(mode=4) |
||
| 5 | MMC2_DAT6 | MMC2_DAT6 | Power down Wlan |
MMC2_DIR_CMD(mode=1) MMC3_DAT2(mode=3) GPIO_138(mode=4) |
||
| 7 | MMC2_DAT5 | MMC2_DAT5 | Reset Bluethoot |
MMC2_DIR_DAT1(mode=1) MMC3_DAT1(mode=3) GPIO_137(mode=4) |
||
| 9 | MMC2_DAT4 | MMC2_DAT4 | - |
MMC_DIR_DAT0(mode=1) MMC3_DAT0(mode=3) GPIO136(mode=4) |
||
| 11 | MMC2_DAT3 | MMC2_DAT3 | (1)Transfer data between Omap and Wlan | McSPI3 | ||
| 13 | MMC2_DAT2 | MMC2_DAT2 | (1) | |||
| 15 | MMC2_DAT1 | MMC2_DAT1 | (1) | |||
| 17 | MMC2_DAT0 | MMC2_DAT0 | (1) | | ||
| 19 | MMC2_CMD | MMC2_CMD | Control Wire for bus MMC2 (Wlan) | |||
| 21 | MMC2_CLK0 | MMC2_CLK | Clock for MMC2 (Wlan) | |||
| 4 | MCBSP3_DX | MCBSP3_DX | Transmitted serial Data (Bluethoot audio) | |||
| 6 | MCBSP3_CLKX | MCBSP3_CLKX | Transmitted serial Clock (Bluethoot audio) | |||
| 8 | MCBSP3_FSX | MCBSP3_FSX | Transmited Frame Syncronisation (Bluethoot audio) | |||
| 10 | MCBSP3_DR | MCBSP3_DR | Received Serial Data (Bluethoot audio) | |||
| 12 | MCBSP1_DX | MCBSP1_DX | Transmited serial Data (not used) | |||
| 14 | MCBSP1_CLKX | MCBSP1_CLKX |
|
|||
| 16 | MCBSP1_FSX | MCBSP1_FSX | Transmited Frame Syncronization (not used) | |||
| 18 | MCBSP1_DR | MCBSP1_DR | Received Serial Data (not used) | |||
| 20 | MCBSP1_CLKR | MCBSP1_CLKR | Received Clock (not used) | |||
| 22 | MCBSP1_FSR | MCBSP1_FSR | Received frame syncronization (not used) | |||
| 23 | I2C2_SDA | I2C2_SDA | I2C Data | |||
| 24 | I2C2_SCL | I2C2_SCL | I2C Clock | |||
| 25 | REGEN | - | ||||
| 26 | nRESET | - | Read Reset Omap | |||
| 27 | GND | - | GND | |||
| 28 | GND | - | GND |
Under construction
