Difference between revisions of "How to use GPIOs"
From IGEP - ISEE Wiki
| Line 45: | Line 45: | ||
= Install binaries = | = Install binaries = | ||
| + | |||
| + | === Install module === | ||
| + | |||
| + | Go to:$/svn.hylands.org/linux/gpio/modules/ and insert user-gpio-drv.ko into linux kernel with the following command: | ||
| + | <pre>insmod user-gpio-drv.ko | ||
| + | </pre> | ||
| + | Check that user-gpio-drv.ko is currently loaded with the following command: | ||
| + | <pre>lsmod</pre> | ||
| + | |||
| + | The module is loaded until system halt. | ||
| + | |||
| + | === Install dynamic library === | ||
<br> | <br> | ||
| + | |||
| + | === Execute app === | ||
| + | |||
| + | <br> | ||
= Testing driver = | = Testing driver = | ||
Revision as of 13:26, 9 January 2012
Contents
Overview
This How-To is meant to be a starting point for people to learn use GPIOs for IGEP v2 devices as quickly and easily as possible. For this how-to i used Linaro Headless, Ubuntu 10.04 with Linaro Toolchain, IGEP v2 RC5 and GPIO driver wrote by Dave Hylands. There are more ways to use GPIOs in IGEP v2, but this one is simple and reliable.
Feedback and Contributing
At any point, if you see a mistake you can contribute to this How-To.
Compile GPIO driver source code
Download source code from author website using the next command:
wget -r -np http://svn.hylands.org/linux/gpio/
Due the Makefiles are wrote for Gumstix SDK, it is necessary change some constants to our Host. There are:
$/svn.hylands.org/linux/gpio/app/Makefile
$/svn.hylands.org/linux/gpio/lib/Makefile
Search lines:
OVEROTOP ?= /home/gumstix/overo-oe CROSS_COMPILE ?= $(OVEROTOP)/tmp/sysroots/x86_64-linux/usr/armv7a/bin/arm-angstrom-linux-gnueabi-
Replace by, your cross compiler path, for example:
OVEROTOP ?= / CROSS_COMPILE ?= $(OVEROTOP)/usr/bin/arm-linux-gnueabi-
$/svn.hylands.org/linux/gpio/modules/Makefile
Search lines:
OVEROTOP ?= /home/gumstix/overo-oe #CROSS_COMPILE ?= $(OVEROTOP)/tmp/cross/armv7a/bin/arm-angstrom-linux-gnueabi- CROSS_COMPILE ?= $(OVEROTOP)/tmp/sysroots/x86_64-linux/usr/armv7a/bin/arm-angstrom-linux-gnueabi- KERNEL_PATH ?= ../../../../../gumstix/overo-oe/tmp/sysroots/overo-angstrom-linux-gnueabi/kernel ARCH ?= arm
Replace by, your cross compiler path and your kernel source path used, for example:
OVEROTOP ?= / #CROSS_COMPILE ?= $(OVEROTOP)/tmp/cross/armv7a/bin/arm-angstrom-linux-gnueabi- CROSS_COMPILE ?= $(OVEROTOP)//usr/bin/arm-linux-gnueabi- KERNEL_PATH ?= ../../../../../<your kernel source path used> ARCH ?= arm
Go to: $/svn.hylands.org/linux/gpio/Makefile and compile app, lib and module using make command.
Transfer binaries created to IGEP v2
Install binaries
Install module
Go to:$/svn.hylands.org/linux/gpio/modules/ and insert user-gpio-drv.ko into linux kernel with the following command:
insmod user-gpio-drv.ko
Check that user-gpio-drv.ko is currently loaded with the following command:
lsmod
The module is loaded until system halt.
Install dynamic library
Execute app
Testing driver
Example:What can I do with IGEP0020#How_to_handle_the_gpio-LED.27s
