Difference between revisions of "How to get the Geexbox distribution"
From IGEP - ISEE Wiki
| Line 45: | Line 45: | ||
$ hg clone http://hg.geexbox.org/geexbox | $ hg clone http://hg.geexbox.org/geexbox | ||
| − | Next, | + | Next, configure geexbox for omap3 based architecture. Set |
| − | + | General Setup -> Target architecture (arm) | |
| − | + | -> Target sub-architecture (ARMv7 / Cortex) | |
| − | + | -> Target platform (OMAP3) | |
| − | + | -> Target CPU (cortex-a8) | |
| − | + | ||
| − | + | Exit and save the configuration, then build with | |
| − | |||
| − | |||
| − | |||
$ make flat | $ make flat | ||
Revision as of 13:09, 5 September 2010
Contents
Overview
GeeXboX is a free embedded Linux distribution which aims at turning your computer into a so called HTPC (Home Theater PC) or Media Center. You can use it on a diskless computer, the whole system being loaded in RAM. Some points to note:
- Whole system being loaded in RAM.
- OpenGL|ES acceleration
- DSP-accelerated media playback with GStreamer (work in progress)
This How-To is meant to be a starting point for people to learn install a GeeXboX image for IGEP v2 devices as quickly and easily as possible.
Requirements
- A GNU/Linux-based host system.
- A SD card
Feedback and Contributing
If you want to contribute to GeeXboX please subscribe to the development list (devel at geexbox.org).
Creating articles in the wiki is a collaborative process, at any point, if you see a mistake you can contribute to this article.
Please, use the discussion tab for user comments. This is useful to separate page content and the discussion thereof and also, if you don't want to give normal users the right to edit the page but still want user contributed notes.
Editing permissions are restricted to registered users. Register in the main IGEP site and you will have single sign-on.
Consult the User's Guide for information on using the wiki software.
There is a set of Wiki contribution guidelines.
References
- The GeeXboX website ( http://www.geexbox.org )
- The Enna website ( http://enna.geexbox.org )
How to build the development branch
Note: The development branch is where the development work takes place and you should use this if you're after to work with the latest cutting edge developments. It is possible trunk can suffer temporary periods of instability while new features are developed and if this is undesirable we recommend using one of the release branches. Use ONLY for development purposes.
GeeXbox uses Mercurial as a revision control system, so you will install the mercurial package for your host syste. On an Ubuntu-based system this will be done with,
$ sudo apt-get install mercurial
Now, the first thing you will do is download the sources from Mercurial GeeXboX repository.
$ hg clone http://hg.geexbox.org/geexbox
Next, configure geexbox for omap3 based architecture. Set
General Setup -> Target architecture (arm)
-> Target sub-architecture (ARMv7 / Cortex)
-> Target platform (OMAP3)
-> Target CPU (cortex-a8)
Exit and save the configuration, then build with
$ make flat
The result will be in geexbox-flat-devel-*.arm.eglibc directory
Make a bootable MMC card with GeeXbox
First prepare the SD card the following way:
- create one boot FAT32 (type 0B) partition, any size, I took 8MB
- create one rootfs EXT2 partition.
Then copy the uImage and boot.ini files to FAT32 partition
$ cp geexbox-flat-devel-*.arm.eglibc/boot/boot.ini /media/boot $ cp geexbox-flat-devel-*.arm.eglibc/boot/uImage /media/boot
Next, edit the geexbox-flat-devel-*.arm.eglibc/etc/video file and disable the OpenGL support
OPENGL=no
Finally, copy the geexbox-flat-devel-*.arm.eglibc contents to EXT2 partition.
$ fakeroot cp -dpfa -R geexbox-flat-devel-*.arm.eglibc/* /media/rootfs/
With default environment the IGEP v2 detects the boot.ini script which contains all the necessary instructions for the OS to auto-boot.
Annex: Known issues and solutions
Requested 'dbus-1 >= 1.2.16' but version of dbus is 1.1.20
The libnih package fails, libnih is compiled for host and for target so your host system needs at least version 1.2.16 of dbus-1.
Distributions affected:
- Ubuntu 8.04 LTS (Hardy Heron)
BUILD alsa make: *** [flat] Error 1
Error :
+ scripts/build alsa-lib + scripts/build alsa-utils + '[' no = yes ']' make: *** [flat] Error 1
Append to packages/alsa/build
exit 0
Should be fixed in r8303.
gzip: stdin: invalid compressed data--crc error
Error :
UNPACK expat gzip: stdin: invalid compressed data--crc error tar: Child returned status 1 tar: Exiting with failure status due to previous errors make: *** [flat] Error 2
Use gzrecover to recover the expat file
$ gzrecover sources/expat/expat-2.0.1.tar.gz $ mv expat-2.0.1.tar.recovered expat-2.0.1.tar $ gzip expat-2.0.1.tar $ mv expat-2.0.1.tar.gz sources/expat/
Distributions affected:
- Ubuntu 10.04 LTS (Lucid Lynx) - (https://bugs.launchpad.net/ubuntu/+source/gzip/+bug/524366)
