Getting started with IGEP PARIS

IGEP PARIS Tutorial Guides

1/3 - Getting started with IGEP PARIS 2/3 - What can I do with IGEP PARIS 3/3 - Start developing with IGEP PARIS IGEP PARIS Product Page IGEP PARIS Hardware manual

Overview

This is the 1/3 chapter of IGEP PARIS Expansion Tutorial Guide.

In this first chapter, we will learn how to connect some expansion peripherals.

Requirements

In this tutorial we are going to use the following peripherals:

• IGEP COM MODULE
• 5V DC power supply with a minimum of 3A current capacity
• TFT touch screen Seiko 7"
• Network cable
• USB keyboard and a mouse (optional)
• Li-on battery with 3V3 (optional)
• DB9 connector
• PC

Getting started

Connect IGEP PARIS Expansion with IGEP COM MODULE/NEUTRON Board

The IGEP PARIS Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors. Just take a look on the figure to mount it:

---

You have successfully completed this chapter of the guide.

Continue this tutorial guide: [[What can I do with IGEP PARIS|2/3 - What can I do with IGEP PARIS]]

If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat