Mux configuration
From IGEP - ISEE Wiki
Explanation
Pad: | Connect to: | Default peripheral (mode=0) | Default function: | Other available peripherals: | Share with: |
1 | VIO 1V8 | - | Power 1v8 | ||
2 | DC 5V | - | Power 5v | ||
3 | MMC2_DAT7 | MMC2_DAT7 | Reset Wlan | ||
5 | MMC2_DAT6 | MMC2_DAT6 | Power down Wlan | ||
7 | MMC2_DAT5 | MMC2_DAT5 | Reset Bluethoot | ||
9 | MMC2_DAT4 | MMC2_DAT4 | - | ||
11 | MMC2_DAT3 | MMC2_DAT3 | (1)Transfer data between Omap and Wlan | ||
13 | MMC2_DAT2 | MMC2_DAT2 | (1) | ||
15 | MMC2_DAT1 | MMC2_DAT1 | (1) | ||
17 | MMC2_DAT0 | MMC2_DAT0 | (1) | hola | |
19 | MMC2_CMD | MMC2_CMD | Control Wire for bus MMC2 (Wlan) | ||
21 | MMC2_CLK0 | MMC2_CLK | Clock for MMC2 (Wlan) | ||
4 | MCBSP3_DX | MCBSP3_DX | Transmitted serial Data (Bluethoot audio) | ||
6 | MCBSP3_CLKX | MCBSP3_CLKX | Transmitted serial Clock (Bluethoot audio) | ||
8 | MCBSP3_FSX | MCBSP3_FSX | Transmited Frame Syncronisation (Bluethoot audio) | ||
10 | MCBSP3_DR | MCBSP3_DR | Received Serial Data (Bluethoot audio) | ||
12 | MCBSP1_DX | MCBSP1_DX | Transmited serial Data (not used) | ||
14 | MCBSP1_CLKX | MCBSP1_CLKX |
|
||
16 | MCBSP1_FSX | MCBSP1_FSX | Transmited Frame Syncronization (not used) | ||
18 | MCBSP1_DR | MCBSP1_DR | Received Serial Data (not used) | ||
20 | MCBSP1_CLKR | MCBSP1_CLKR | Received Clock (not used) | ||
22 | MCBSP1_FSR | MCBSP1_FSR | Received frame syncronization (not used) | ||
23 | I2C2_SDA | I2C2_SDA | I2C Data | ||
24 | I2C2_SCL | I2C2_SCL | I2C Clock | ||
25 | REGEN | - | |||
26 | nRESET | - | Read Reset Omap | ||
27 | GND | - | GND | ||
28 | GND | - | GND |
Under construction