IGEP SMARC AM335x

Industrial Processor AM335x Cortex-A8 Module up to 1000 MHz

IGEP SMARC AM335x Module cover an extremely wide performance range. Based on the ARM Cortex-A8 technology, they enable an efficient development of smart devices in an extremely compact, fanless design with balanced processor and graphics performance..

Features
Processor	AM3352 (Standard Setup) / AM3354 / AM3358 / AM3359, by Texas Instruments ARM Cortex-A8 NEON SIMD Coprocessor Frequency speed up to 1000 MHz (depending on model)
3D/2D Accelerator	PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (depending on model)
Memory	RAM: 128 MB up to 512 MB DDR3 (Standard setup 256 MB) FLASH: 128 MB up to 512 MB (Standard setup 128 MB)
Ethernet	10/100 Mbps Ethernet PHY interface 10/100/1000 Mbps Ethernet PHY interface (optional)
USB	1 x USB 2.0 Host 1 x USB 2.0 OTG
Display	1 x Digital Video/TFT interface (16-bits) 1 x DVI-D/HDMI (16-bits) (optional)
Wireless	WiFi IEEE 802.11 b/g/n (Access Point: Yes) Bluetooth v4.0 (BLE)
Antenna	1 x Internal WiFi/Bluetooth antenna 1 x U.FL connector for external antenna (Optional)
Additional Interfaces (Other combinations available, see Hardware Manual for more information)	2 x I2C 2 x CAN 1 x SPI 5 x GPIOs 1 x McASP/I2S (Digital Serial Audio Interface) 1 x PWM 8 x ADC 3 x UART 2 x MMC JTAG Interface
SW Support	Linux
Power Supply	Power Supply: From 4,5 V to 5,5 V Digital I/O voltage: 1,8 V
Power Consumption	Typical 1,2 W (depending on software) Maximum 3,5 W (depending on software)
Thermal	Industrial temperature: -40 ºC to +80 ºC Optional:Commercial temperature: 0 ºC to +60 ºC
Form Factor	82,00 mm x 50,00 mm
Humidity	93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF	> 100000 hours

Versions

Model	Description
IGEP0034 - RA	Internal use, AM3354 processor (2016)
IGEP0034 - RB	AM3352 processor (2018)

Documentation

• IGEP SMARC SoC: AM335x
• Datasheet
• Mechanicals
• Software Manual
• Hardware Manual

Tutorials

If you are new with concepts from below we recommend you complete  the tutorials in order !

1. IGEP SMARC AM335x Boot Pin-out
2. Prepare a ready to boot firmware.
3. How to prepare a ready to boot firmware.
4. U-Boot Bootloader.
5. Linux Kernel.
6. IGEP Firmware set-up.
7. Boot from MicroSD Card.
8. Boot from NAND/eMMC flash.
9. Update Installed IGEP Firmware.

Firmware

Official

• Official IGEP Firmware

Custom Software

• Ubuntu Xenial 16.04 LTS ARM Hard Float
• Debian Stretch ARM Hard Float
• Yocto Pyro ARM Hard Float
• Buildroot ARM Hard Float

Guides

Getting started with IGEP SMARC AM335x

• Getting started with IGEP SMARC AM335x

Ubuntu / Debian

• How To Set Up an NFS Mount on Ubuntu 16.04

Yocto

• How to use the Yocto Project to develop Embedded Linux