IGEP SMARC AM335x
From IGEP - ISEE Wiki
Contents
Industrial Processor AM335x Cortex-A8 Module up to 1000 MHz
IGEP SMARC AM335x Module cover an extremely wide performance range. Based on the ARM Cortex-A8 technology, they enable an efficient development of smart devices in an extremely compact, fanless design with balanced processor and graphics performance..
Features | |
Processor |
AM3352 (Standard Setup) / AM3354 / AM3358 / AM3359, by Texas Instruments |
3D/2D Accelerator |
PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (depending on model) |
Memory |
RAM: 128 MB up to 512 MB DDR3 (Standard setup 256 MB) FLASH: 128 MB up to 512 MB (Standard setup 128 MB) |
Ethernet |
10/100 Mbps Ethernet PHY interface |
USB |
1 x USB 2.0 Host |
Display |
1 x Digital Video/TFT interface (16-bits) |
Wireless |
WiFi IEEE 802.11 b/g/n (Access Point: Yes) |
Antenna |
1 x Internal WiFi/Bluetooth antenna |
Additional Interfaces (Other combinations available, see Hardware Manual for more information) |
2 x I2C |
SW Support |
Linux |
Power Supply |
Power Supply: From 4,5 V to 5,5 V Digital I/O voltage: 1,8 V |
Power Consumption |
Typical 1,2 W (depending on software) Maximum 3,5 W (depending on software) |
Thermal |
Industrial temperature: -40 ºC to +80 ºC Optional:Commercial temperature: 0 ºC to +60 ºC |
Form Factor |
82,00 mm x 50,00 mm |
Humidity |
93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
MTBF |
> 100000 hours |
Versions
Model | Description |
---|---|
IGEP0034 - RA | Internal use, AM3354 processor (2016) |
IGEP0034 - RB | AM3352 processor (2017) |
Firmware
Documentation
- DM3730
- Pre-installed_software_on_IGEP_Processor_Boards
- Update_the_PRE-INSTALLED_software_image_to_a_current_release
- How to boot from MicroSD Card
- IGEP Firmware Yocto
- IGEP Firmware Ubuntu
- IGEP Firmware Debian
- U-boot Bootloader
- Linux Kernel
- IGEPv2 Boot Process