IGEPv2 Ubuntu Distro
From IGEP - ISEE Wiki
WORK IN PROGRESS
How to get the Ubuntu 12.04.4 LTS
The Ubuntu project is excited to be working with the ARM ecosystem to port Ubuntu for ARM-based devices. This work fits with our goals of making Ubuntu available as an open platform to as many people as possible.
Overview of How-To
This How-To is meant to be a starting point for people to learn install an Ubuntu image for OMAP3-based IGEP platforms as quickly and easily as possible.
This How-To covers IGEPv2, IGEP COM Module and IGEP COM Proton boards. if you are looking Ubuntu for IGEPv5 go to this other Howto.
Contents
Host Enviroment
We suggest use Ubuntu 12.04.4 LTS (32 bits) in your host, you can download it from our server using this link or directly from Ubuntu (Canonical) website. You can install it in a Virtual Machine enviroment using any Virtualization software or directly in your PC.
Material
- IGEPv2, IGEP COM Module or IGEP COM Proton.
- 1 MicroSD Card with 512 MiB minimum space.
- Serial Cable and conversor for attach the serial debug console.
- Ethernet cable (optional)
- Hub (optional)
- Keyboard and mouse (optional)
- HDMI/DVI Monitor (optional)
Download the Ubuntu 12.04.4 LTS Distribution and tools
The Ubuntu 12.04.4 LTS distribution can be downloaded from here or if you want to use the hard float version you should use this other link.
The first boot must be done using the first boot package, inside you've the bootloader, igep.ini and temporary kernel.
You can download this script for create the right partitions in the microsd card (Only is valid for microsd card, it cannot be used for prepare the raw Nand flash)
Prepare the Enviroment
Check if you've the packages bc and dosfstools
Install both packages as:
apt-get install bc dosfstools
Prepare the MicroSD card
Insert the microsd card in your host, after that you should see any similar to this output:
mcaro@mcaro-vm-u12:~$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT fd0 2:0 1 4K 0 disk sda 8:0 0 100G 0 disk ├─sda1 8:1 0 98G 0 part / ├─sda2 8:2 0 1K 0 part └─sda5 8:5 0 2G 0 part sdb 8:16 1 3.8G 0 disk ├─sdb1 8:17 1 70.6M 0 part /media/boot └─sdb2 8:18 1 3.7G 0 part /media/rootfs sr0 11:0 1 1024M 0 rom
here you can see the device sdb (it's the 4 GiB microsd card) be careful due in your host can be other device like sdc if you doubt check the dmesg output it should show you the device as:
[258974.855508] sd 33:0:0:0: [sdb] 7882752 512-byte logical blocks: (4.03 GB/3.75 GiB) [258974.862052] sd 33:0:0:0: [sdb] No Caching mode page found [258974.862057] sd 33:0:0:0: [sdb] Assuming drive cache: write through [258974.869338] sd 33:0:0:0: [sdb] No Caching mode page found [258974.869341] sd 33:0:0:0: [sdb] Assuming drive cache: write through [258974.871258] sdb: sdb1 sdb2 [258975.642423] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
Now you should execute the script prepare-disk.sh
mcaro@mcaro-vm-u12:~$ ./prepare-disk.sh fd0 2:0 1 4K 0 disk sda 8:0 0 100G 0 disk sdb 8:16 1 3.8G 0 disk Select the disk: [sdx or mmcblkx]
Here you should write the device name in our case sdb
sdb sdb Erase disk: /dev/sdb Are your sure? Y/n y
Verify the disk selected is correct if this is the situation then set Y
1024+0 records in 1024+0 records out 1048576 bytes (1.0 MB) copied, 0.749578 s, 1.4 MB/s Disk /dev/sdb doesn't contain a valid partition table DISK SIZE - 4035969024 bytes CYLINDERS - 490 Checking that no-one is using this disk right now ... OK Disk /dev/sdb: 490 cylinders, 255 heads, 63 sectors/track sfdisk: ERROR: sector 0 does not have an msdos signature /dev/sdb: unrecognized partition table type Old situation: No partitions found New situation: Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 * 0+ 8 9- 72261 c W95 FAT32 (LBA) /dev/sdb2 9 489 481 3863632+ 83 Linux /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty Successfully wrote the new partition table Re-reading the partition table ... If you created or changed a DOS partition, /dev/foo7, say, then use dd(1) to zero the first 512 bytes: dd if=/dev/zero of=/dev/foo7 bs=512 count=1 (See fdisk(8).) /dev/sdb1 /dev/sdb2 mkfs.vfat 3.0.12 (29 Oct 2011) mke2fs 1.42 (29-Nov-2011) Filesystem label=rootfs OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 241920 inodes, 965908 blocks 48295 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=989855744 30 block groups 32768 blocks per group, 32768 fragments per group 8064 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736 Allocating group tables: done Writing inode tables: done Creating journal (16384 blocks): done Writing superblocks and filesystem accounting information: done
After finish the microsd card will be ready for install the Ubuntu the microsd card will show you two partitions, the first one formated with FAT32 and the second one formated with EXT4.
TIP: If the microsd card is not mounted remove the microsd card and insert it again and the system will mount it automatically or mount the card manually.