Difference between revisions of "Mux configuration"

From IGEP - ISEE Wiki

Jump to: navigation, search
Line 36: Line 36:
  
 
| <div align="JUSTIFY"><font size="2">'''Wlan:''' This pad can reset Wlan peripheral using Omap GPIO low level (GND). If you reset continuously Wlan all their pads are in High Impedance. Also you can disable Wlan from J990 low level.</font></div> <div align="JUSTIFY"><font size="2">'''Omap: '''<span style="font-weight: normal">protect Omap pad if you don't
 
| <div align="JUSTIFY"><font size="2">'''Wlan:''' This pad can reset Wlan peripheral using Omap GPIO low level (GND). If you reset continuously Wlan all their pads are in High Impedance. Also you can disable Wlan from J990 low level.</font></div> <div align="JUSTIFY"><font size="2">'''Omap: '''<span style="font-weight: normal">protect Omap pad if you don't
−
use it.</span>'''(1)'''</font></div>  
+
use it.</span>'''(1)'''</font></div>
 
|-
 
|-
 
| 5  
 
| 5  
Line 50: Line 50:
  
 
| <div align="JUSTIFY"><font size="2">'''Wlan:''' This pad can power down Wlan peripheral using Omap GPIO low level (GND), power up removing GND. Also you can power down Wlan from J990 low level.</font></div> <div align="JUSTIFY"><font size="2">'''Omap: '''<span style="font-weight: normal">protect Omap pad if you don't
 
| <div align="JUSTIFY"><font size="2">'''Wlan:''' This pad can power down Wlan peripheral using Omap GPIO low level (GND), power up removing GND. Also you can power down Wlan from J990 low level.</font></div> <div align="JUSTIFY"><font size="2">'''Omap: '''<span style="font-weight: normal">protect Omap pad if you don't
−
use it.</span>'''(1)'''</font></div>  
+
use it.</span>'''(1)'''</font></div>
 
|-
 
|-
 
| 7  
 
| 7  
Line 64: Line 64:
  
 
| <div align="JUSTIFY"><font size="2">'''Bluethoot: '''<span style="font-weight: normal">This pad can reset Bluethoot
 
| <div align="JUSTIFY"><font size="2">'''Bluethoot: '''<span style="font-weight: normal">This pad can reset Bluethoot
 +
 
peripheral using Omap GPIO low level (GND). If you reset continuously
 
peripheral using Omap GPIO low level (GND). If you reset continuously
 
Bluethoot all their pads are in High Impedance. Also you can disable
 
Bluethoot all their pads are in High Impedance. Also you can disable
 +
 +
 
Bluethoot from J990 low level.</span></font></div> <div align="JUSTIFY"><font size="2">'''Omap: '''<span style="font-weight: normal">protect Omap pad if you don't
 
Bluethoot from J990 low level.</span></font></div> <div align="JUSTIFY"><font size="2">'''Omap: '''<span style="font-weight: normal">protect Omap pad if you don't
−
use it.</span>'''(1)'''</font></div>  
+
use it.</span>'''(1)'''</font></div>
 
|-
 
|-
 
| 9  
 
| 9  
Line 82: Line 85:
 
| <div align="JUSTIFY"><font size="2">'''Wlan: '''<span style="font-weight: normal">Protect Wlan if you don' use
 
| <div align="JUSTIFY"><font size="2">'''Wlan: '''<span style="font-weight: normal">Protect Wlan if you don' use
 
it. See MMC2_DAT7 pad.</span></font></div> <div align="JUSTIFY"><font size="2">'''Omap: '''<span style="font-weight: normal">protect Omap pad if you don't
 
it. See MMC2_DAT7 pad.</span></font></div> <div align="JUSTIFY"><font size="2">'''Omap: '''<span style="font-weight: normal">protect Omap pad if you don't
−
use it.</span>'''(1)'''</font></div>  
+
use it.</span>'''(1)'''</font></div>
 
|-
 
|-
 
| 11  
 
| 11  
Line 89: Line 92:
 
| (1)Transfer data between Omap and Wlan  
 
| (1)Transfer data between Omap and Wlan  
 
|  
 
|  
−
McSPI3_CS0(mode=1)
+
McSPI3_CS0(mode=1)  
  
−
GPIO_135(mode=4)
+
GPIO_135(mode=4)  
  
−
| <div align="JUSTIFY"><font size="2">'''<br>'''<span style="font-weight: normal" /></font></div>  
+
| <div align="JUSTIFY"><font size="2">'''<br>'''&lt;span style="font-weight: normal" /&gt;</font></div>
 
|-
 
|-
 
| 13  
 
| 13  
Line 100: Line 103:
 
| (1)  
 
| (1)  
 
|  
 
|  
−
McSPI3_CS1(mode=1)
+
McSPI3_CS1(mode=1)  
  
−
GPIO_134(mode=4)
+
GPIO_134(mode=4)  
  
 
|  
 
|  
Line 110: Line 113:
 
| MMC2_DAT1  
 
| MMC2_DAT1  
 
| (1)  
 
| (1)  
−
| GPIO_133(mode=4)
+
| GPIO_133(mode=4)  
 
|  
 
|  
 
|-
 
|-
Line 118: Line 121:
 
| (1)  
 
| (1)  
 
|  
 
|  
−
McSPI3_SOMI(mode=1)
+
McSPI3_SOMI(mode=1)  
  
−
GPIO_132(mode=4)
+
GPIO_132(mode=4)  
  
 
| <br>
 
| <br>
Line 129: Line 132:
 
| Control Wire for bus MMC2 (Wlan)  
 
| Control Wire for bus MMC2 (Wlan)  
 
|  
 
|  
−
McSPI3_SIMO(mode=1)
+
McSPI3_SIMO(mode=1)  
  
−
GPIO_131(mode=4)
+
GPIO_131(mode=4)  
  
 
|  
 
|  
Line 140: Line 143:
 
| Clock for MMC2 (Wlan)  
 
| Clock for MMC2 (Wlan)  
 
|  
 
|  
−
McSPI3_CLK(mode=1)
+
McSPI3_CLK(mode=1)  
  
−
GPIO_130(mode=4)
+
GPIO_130(mode=4)  
  
 
|  
 
|  
Line 151: Line 154:
 
| Transmitted serial Data (Bluethoot audio)  
 
| Transmitted serial Data (Bluethoot audio)  
 
|  
 
|  
−
UART2_CTS(mode=1)
+
UART2_CTS(mode=1)  
  
−
GPIO_140(mode=4)
+
GPIO_140(mode=4)  
  
 
| <div align="JUSTIFY"><font size="2">'''TPS65950:''' disable it via kernel '''(2) '''<span style="font-weight: normal">If
 
| <div align="JUSTIFY"><font size="2">'''TPS65950:''' disable it via kernel '''(2) '''<span style="font-weight: normal">If
Line 163: Line 166:
 
| Transmitted serial Clock (Bluethoot audio)  
 
| Transmitted serial Clock (Bluethoot audio)  
 
|  
 
|  
−
UART2_TX(mode=1)
+
UART2_TX(mode=1)  
  
−
GPIO_142(mode=4)
+
GPIO_142(mode=4)  
  
 
| <div align="JUSTIFY"><font size="2">'''Bluethoot: '''<span style="font-weight: normal">Protect Bluethoot if you don'
 
| <div align="JUSTIFY"><font size="2">'''Bluethoot: '''<span style="font-weight: normal">Protect Bluethoot if you don'
 
use it. See MMC2_DAT5 pad.</span></font></div> <div align="JUSTIFY"><br> </div> <div align="JUSTIFY"><font size="2">'''TPS65950:''' disable it via kernel '''(2) '''<span style="font-weight: normal">If
 
use it. See MMC2_DAT5 pad.</span></font></div> <div align="JUSTIFY"><br> </div> <div align="JUSTIFY"><font size="2">'''TPS65950:''' disable it via kernel '''(2) '''<span style="font-weight: normal">If
−
you don't use it.</span></font></div>  
+
you don't use it.</span></font></div>
 
|-
 
|-
 
| 8  
 
| 8  
Line 176: Line 179:
 
| Transmited Frame Syncronisation (Bluethoot audio)  
 
| Transmited Frame Syncronisation (Bluethoot audio)  
 
|  
 
|  
−
UART2_RX(mode=1)
+
UART2_RX(mode=1)  
  
−
GPIO_143(mode=4)
+
GPIO_143(mode=4)  
  
 
| <div align="JUSTIFY"><font size="2">'''Bluethoot: '''<span style="font-weight: normal">Protect Bluethoot if you don'
 
| <div align="JUSTIFY"><font size="2">'''Bluethoot: '''<span style="font-weight: normal">Protect Bluethoot if you don'
 
use it. See MMC2_DAT5 pad.</span></font></div> <div align="JUSTIFY"><br> </div> <div align="JUSTIFY"><font size="2">'''TPS65950:''' disable it via kernel '''(2) '''<span style="font-weight: normal">If
 
use it. See MMC2_DAT5 pad.</span></font></div> <div align="JUSTIFY"><br> </div> <div align="JUSTIFY"><font size="2">'''TPS65950:''' disable it via kernel '''(2) '''<span style="font-weight: normal">If
−
you don't use it.</span></font></div>  
+
you don't use it.</span></font></div>
 
|-
 
|-
 
| 10  
 
| 10  
Line 189: Line 192:
 
| Received Serial Data (Bluethoot audio)  
 
| Received Serial Data (Bluethoot audio)  
 
|  
 
|  
−
UART2_RTS(mode=1)
+
UART2_RTS(mode=1)  
  
−
GPIO_141(mode=4)
+
GPIO_141(mode=4)  
  
 
| <div align="JUSTIFY"><font size="2">'''TPS65950:''' disable it via kernel '''(2) '''<span style="font-weight: normal">If
 
| <div align="JUSTIFY"><font size="2">'''TPS65950:''' disable it via kernel '''(2) '''<span style="font-weight: normal">If
−
you don't use it.</span></font></div>  
+
you don't use it.</span></font></div>
 
|-
 
|-
 
| 12  
 
| 12  
Line 201: Line 204:
 
| Transmited serial Data (not used)  
 
| Transmited serial Data (not used)  
 
|  
 
|  
−
McSPI4_SIMO(mode=1)
+
McSPI4_SIMO(mode=1)  
  
−
McBSP3_DX(mode=2)
+
McBSP3_DX(mode=2)  
  
−
GPIO_158(mode=4)
+
GPIO_158(mode=4)  
  
 
|  
 
|  
Line 215: Line 218:
 
{| border="1" align="center" width="200" cellspacing="1" cellpadding="1"
 
{| border="1" align="center" width="200" cellspacing="1" cellpadding="1"
 
|-
 
|-
−
|  
+
| yyyy
 
|}
 
|}
  
 
|  
 
|  
−
McBSP3_CLKX(mode=2)
+
McBSP3_CLKX(mode=2)  
  
−
GPIO_162(mode=4)
+
GPIO_162(mode=4)  
  
 
|  
 
|  
Line 230: Line 233:
 
| Transmited Frame Syncronization (not used)  
 
| Transmited Frame Syncronization (not used)  
 
|  
 
|  
−
McSPI4_CS0(mode=1)
+
McSPI4_CS0(mode=1)  
  
−
McBSP3_FSX(mode=2)
+
McBSP3_FSX(mode=2)  
  
−
GPIO_161(mode=4)
+
GPIO_161(mode=4)  
  
 
|  
 
|  
Line 243: Line 246:
 
| Received Serial Data (not used)  
 
| Received Serial Data (not used)  
 
|  
 
|  
−
McSPI4_SOMI(mode=1)
+
McSPI4_SOMI(mode=1)  
  
−
McBSP3_DR(mode=2)
+
McBSP3_DR(mode=2)  
  
−
GPIO_159(mode=4)
+
GPIO_159(mode=4)  
  
 
|  
 
|  
Line 256: Line 259:
 
| Received Clock (not used)  
 
| Received Clock (not used)  
 
|  
 
|  
−
GPIO_156(mode=4)<br>
+
GPIO_156(mode=4)<br>  
  
 
|  
 
|  
Line 265: Line 268:
 
| Received frame syncronization (not used)  
 
| Received frame syncronization (not used)  
 
|  
 
|  
−
GPIO_157(mode=4)<br>
+
GPIO_157(mode=4)<br>  
  
 
|  
 
|  
Line 274: Line 277:
 
| I2C Data  
 
| I2C Data  
 
|  
 
|  
−
GPIO_183(mode=4)<br>
+
GPIO_183(mode=4)<br>  
  
−
| <div align="JUSTIFY"><font size="2">'''Cam connector:''' Check RC13 and RC14 is not welded or don't use it.<br></font></div>  
+
| <div align="JUSTIFY"><font size="2">'''Cam connector:''' Check RC13 and RC14 is not welded or don't use it.<br></font></div>
 
|-
 
|-
 
| 24  
 
| 24  
Line 283: Line 286:
 
| I2C Clock  
 
| I2C Clock  
 
|  
 
|  
−
GPIO_168(mode=4)<br>
+
GPIO_168(mode=4)<br>  
  
 
|  
 
|  
Line 291: Line 294:
 
| -  
 
| -  
 
|  
 
|  
−
| -
+
| -  
 
|  
 
|  
 
|-
 
|-
Line 298: Line 301:
 
| -  
 
| -  
 
| Read Reset Omap  
 
| Read Reset Omap  
−
| -
+
| -  
 
|  
 
|  
 
|-
 
|-
Line 305: Line 308:
 
| -  
 
| -  
 
| GND  
 
| GND  
−
| -
+
| -  
 
|  
 
|  
 
|-
 
|-
Line 312: Line 315:
 
| -  
 
| -  
 
| GND  
 
| GND  
−
| -
+
| -  
 
|  
 
|  
 
|}
 
|}
  
 
Under construction
 
Under construction

Revision as of 17:52, 16 November 2011

Explanation

Pad: Connect to: Default peripheral (mode=0) Default function: Other available peripherals: Share with:
1 VIO 1V8 - Power 1v8 -
2 DC 5V - Power 5v -
3 MMC2_DAT7 MMC2_DAT7 Reset Wlan

MMC2_CLKIN(mode=1)

MMC3_DAT3(mode=3)

GPIO_139(mode=4)

Wlan: This pad can reset Wlan peripheral using Omap GPIO low level (GND). If you reset continuously Wlan all their pads are in High Impedance. Also you can disable Wlan from J990 low level.
Omap: protect Omap pad if you don't use it.(1)
5 MMC2_DAT6 MMC2_DAT6 Power down  Wlan

MMC2_DIR_CMD(mode=1)

MMC3_DAT2(mode=3)

GPIO_138(mode=4)

Wlan: This pad can power down Wlan peripheral using Omap GPIO low level (GND), power up removing GND. Also you can power down Wlan from J990 low level.
Omap: protect Omap pad if you don't use it.(1)
7 MMC2_DAT5 MMC2_DAT5 Reset Bluethoot

MMC2_DIR_DAT1(mode=1)

MMC3_DAT1(mode=3)

GPIO_137(mode=4)

Bluethoot: This pad can reset Bluethoot

peripheral using Omap GPIO low level (GND). If you reset continuously Bluethoot all their pads are in High Impedance. Also you can disable


Bluethoot from J990 low level.
Omap: protect Omap pad if you don't use it.(1)
9 MMC2_DAT4 MMC2_DAT4 -

MMC_DIR_DAT0(mode=1)

MMC3_DAT0(mode=3)

GPIO136(mode=4)

Wlan: Protect Wlan if you don' use it. See MMC2_DAT7 pad.
Omap: protect Omap pad if you don't use it.(1)
11 MMC2_DAT3 MMC2_DAT3 (1)Transfer data between Omap and Wlan

McSPI3_CS0(mode=1)

GPIO_135(mode=4)


<span style="font-weight: normal" />
13 MMC2_DAT2 MMC2_DAT2 (1)

McSPI3_CS1(mode=1)

GPIO_134(mode=4)

15 MMC2_DAT1 MMC2_DAT1 (1) GPIO_133(mode=4)
17 MMC2_DAT0 MMC2_DAT0 (1)

McSPI3_SOMI(mode=1)

GPIO_132(mode=4)


19 MMC2_CMD MMC2_CMD Control Wire for bus MMC2 (Wlan)

McSPI3_SIMO(mode=1)

GPIO_131(mode=4)

21 MMC2_CLK0 MMC2_CLK Clock for MMC2 (Wlan)

McSPI3_CLK(mode=1)

GPIO_130(mode=4)

4 MCBSP3_DX MCBSP3_DX Transmitted serial Data (Bluethoot audio)

UART2_CTS(mode=1)

GPIO_140(mode=4)

TPS65950: disable it via kernel (2) If you don't use it.
6 MCBSP3_CLKX MCBSP3_CLKX Transmitted serial Clock (Bluethoot audio)

UART2_TX(mode=1)

GPIO_142(mode=4)

Bluethoot: Protect Bluethoot if you don' use it. See MMC2_DAT5 pad.

TPS65950: disable it via kernel (2) If you don't use it.
8 MCBSP3_FSX MCBSP3_FSX Transmited Frame Syncronisation (Bluethoot audio)

UART2_RX(mode=1)

GPIO_143(mode=4)

Bluethoot: Protect Bluethoot if you don' use it. See MMC2_DAT5 pad.

TPS65950: disable it via kernel (2) If you don't use it.
10 MCBSP3_DR MCBSP3_DR Received Serial Data (Bluethoot audio)

UART2_RTS(mode=1)

GPIO_141(mode=4)

TPS65950: disable it via kernel (2) If you don't use it.
12 MCBSP1_DX MCBSP1_DX Transmited serial Data (not used)

McSPI4_SIMO(mode=1)

McBSP3_DX(mode=2)

GPIO_158(mode=4)

14 MCBSP1_CLKX MCBSP1_CLKX
yyyy

McBSP3_CLKX(mode=2)

GPIO_162(mode=4)

16 MCBSP1_FSX MCBSP1_FSX Transmited Frame Syncronization (not used)

McSPI4_CS0(mode=1)

McBSP3_FSX(mode=2)

GPIO_161(mode=4)

18 MCBSP1_DR MCBSP1_DR Received Serial Data (not used)

McSPI4_SOMI(mode=1)

McBSP3_DR(mode=2)

GPIO_159(mode=4)

20 MCBSP1_CLKR MCBSP1_CLKR Received Clock (not used)

GPIO_156(mode=4)
22 MCBSP1_FSR MCBSP1_FSR Received frame syncronization (not used)

GPIO_157(mode=4)
23 I2C2_SDA I2C2_SDA I2C Data

GPIO_183(mode=4)
Cam connector: Check RC13 and RC14 is not welded or don't use it.
24 I2C2_SCL I2C2_SCL I2C Clock

GPIO_168(mode=4)
25 REGEN - -
26 nRESET - Read Reset Omap -
27 GND - GND -
28 GND - GND -

Under construction

Retrieved from "http://labs.isee.biz/index.php?title=Mux_configuration&oldid=2782"