Difference between revisions of "IGEPv5"
From IGEP - ISEE Wiki
(→Software) |
|||
| Line 116: | Line 116: | ||
|} | |} | ||
| − | + | ==Documentation== | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
* IGEPv5 SoC: OMAP5 | * IGEPv5 SoC: OMAP5 | ||
* Datasheet | * Datasheet | ||
| Line 134: | Line 123: | ||
* [http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEPv5/Manuals/MAN-PR-IGEP0050-RBxx-001-IGEPv5_HARDWARE_REFERENCE_MANUAL-1.0-20131126.pdf Hardware Manual] | * [http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEPv5/Manuals/MAN-PR-IGEP0050-RBxx-001-IGEPv5_HARDWARE_REFERENCE_MANUAL-1.0-20131126.pdf Hardware Manual] | ||
| − | === | + | ==Tutorials== |
| + | # IGEPv5 Boot Pin-out | ||
| + | # [http://labs.isee.biz/index.php/Prepare_a_ready_to_boot_firmware How to prepare a ready to boot firmware] | ||
| + | # [[The bootloader U-Boot|U-Boot Bootloader]] | ||
| + | # [[Linux Kernel 4.9.y|Linux Kernel]] | ||
| + | # [http://labs.isee.biz/index.php/IGEP_Firmware_set-up IGEP Firmware set-up] | ||
| + | # [[How to prepare a bootable MicroSD Card|Boot from MicroSD Card]] | ||
| + | # [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]] | ||
| + | # [http://labs.isee.biz/index.php/Update_installed_IGEP_Firmware Update Installed IGEP Firmware] | ||
| + | |||
| + | ==Firmware== | ||
| + | ===Official=== | ||
* [http://labs.isee.biz/index.php/IGEP_Firmware_set-up#Install_IGEP_Firmware_on_bootable_SD-card Official IGEP Firmware] | * [http://labs.isee.biz/index.php/IGEP_Firmware_set-up#Install_IGEP_Firmware_on_bootable_SD-card Official IGEP Firmware] | ||
| + | |||
| + | ===Custom Software=== | ||
* [http://downloads.isee.biz/pub/isee-releases/ubuntu/xenial_16.04_lts/ubuntu-xenial-armhf-igep-base-v0.01.tgz Ubuntu Xenial 16.04 LTS ARM Hard Float] | * [http://downloads.isee.biz/pub/isee-releases/ubuntu/xenial_16.04_lts/ubuntu-xenial-armhf-igep-base-v0.01.tgz Ubuntu Xenial 16.04 LTS ARM Hard Float] | ||
* [http://downloads.isee.biz/pub/relaunch/rootfs/debian/stretch/debian-stretch-armhf-igep-base-v0.01.tgz Debian Stretch 9 ARM Hard Float] | * [http://downloads.isee.biz/pub/relaunch/rootfs/debian/stretch/debian-stretch-armhf-igep-base-v0.01.tgz Debian Stretch 9 ARM Hard Float] | ||
* [http://downloads.isee.biz/pub/relaunch/rootfs/buildroot/skeltal/igep-buildroot-skeltal-base-v0.01.bz2 Buildroot ARM Hard Float] | * [http://downloads.isee.biz/pub/relaunch/rootfs/buildroot/skeltal/igep-buildroot-skeltal-base-v0.01.bz2 Buildroot ARM Hard Float] | ||
| − | ==<span dir="auto">Getting started with IGEPv5 | + | ==<span dir="auto">Guides</span>== |
| + | ===Getting started with IGEPv5=== | ||
* [[Getting started with IGEPv5]] | * [[Getting started with IGEPv5]] | ||
| − | ==Ubuntu/Debian | + | ===Ubuntu / Debian=== |
* [[How To Set Up an NFS Mount on Ubuntu 16.04]] | * [[How To Set Up an NFS Mount on Ubuntu 16.04]] | ||
| − | ==Yocto | + | ===Yocto=== |
* [[How to use the Yocto Project to develop Embedded Linux]] | * [[How to use the Yocto Project to develop Embedded Linux]] | ||
Revision as of 10:23, 25 September 2018
Contents
Processor board DUAL core ARM Cortex-A15 up to 1,5 GHz
IGEPv5 is an embedded processor development board based on Texas Instruments OMAP5432 Multimedia Application Device and up to 4 GB DDR3 RAM. This board is designed to evaluate performance and features for advanced industrial applications. This board supports expandability via onboard connectors.
Features |
|
|---|---|
| Processor |
OMAP5432, by Texas Instruments |
| 3D/2D Accelerator | 2D GC320 Core from Vivante® Corp Graphics Accelerator 2D/3D Dual Core POWERVR SGX544 Graphics Accelerator |
| Video |
DSS Video Display Subsystem (WUXGA) |
| Memory | RAM: Up to 4 GB DDR3 Flash: 8 GB eMMC Onboard micro-SD card socket |
| Ethernet |
10/100/1000 Mbps Ethernet PHY Interface |
| USB |
4 x USB 2.0 Host |
| Display |
HDMI 1.4a (with audio), micro HDMI connector |
| Image Capture Interface | 1 x MIPI CSI interface (5 lanes) / 1 x CPI interface (16 bits) |
| Wireless |
WiFi IEEE 802.11 b/g/n |
| Antenna |
1 x Internal WiFi/Bluetooth antenna |
| Additional Interfaces |
5 x I2C |
| SW Support | Linux Android |
| Power Supply | Power from jack power: 5 V |
| Power Consumption | Typical 3 W (depending on software) Maximum 6 W (depending on software) |
| Thermal | Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC |
| Form Factor | 135 mm x 95 mm |
| Humidity | 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
| MTBF | > 100000 hours |
Options |
|
|---|---|
| Processor |
|
| Grade |
|
| Main Memory |
|
| Flash Memory |
|
| Wireless |
|
Documentation
- IGEPv5 SoC: OMAP5
- Datasheet
- Mechanicals
- Software Manual
- Hardware Manual
Tutorials
- IGEPv5 Boot Pin-out
- How to prepare a ready to boot firmware
- U-Boot Bootloader
- Linux Kernel
- IGEP Firmware set-up
- Boot from MicroSD Card
- Boot from NAND/eMMC flash.
- Update Installed IGEP Firmware
