Difference between revisions of "IGEP COM AQUILA"

From IGEP - ISEE Wiki

Jump to: navigation, search
Line 139: Line 139:
  
  
−
==Firmware==
+
==Documentation==
−
===Tutorials===
 
−
* IGEP COM AQUILA Boot Pin-out.
 
−
* [http://labs.isee.biz/index.php/Prepare_a_ready_to_boot_firmware How to prepare a ready to boot firmware.]
 
−
* [[The bootloader U-Boot|U-Boot Bootloader.]]
 
−
* [[Linux Kernel 4.9.y|Linux Kernel.]]
 
−
* [http://labs.isee.biz/index.php/IGEP_Firmware_set-up IGEP Firmware set-up.]
 
−
* [[How to prepare a bootable MicroSD Card|Boot from MicroSD Card.]]
 
−
* [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]]
 
−
* [http://labs.isee.biz/index.php/Update_installed_IGEP_Firmware Update Installed IGEP Firmware.]
 
−
 
 
−
===Documentation===
 
 
* [[AM335x|IGEP COM AQUILA SoC: AM335x]]
 
* [[AM335x|IGEP COM AQUILA SoC: AM335x]]
 
* [http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEP_COM_AQUILA/Datasheet/IGEP_COM_AQUILA_DATASHEET_20160711.pdf Datasheet]
 
* [http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEP_COM_AQUILA/Datasheet/IGEP_COM_AQUILA_DATASHEET_20160711.pdf Datasheet]
Line 157: Line 146:
 
* [http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEP_COM_AQUILA/Manuals/MAN-PR-IGEP0033-RBxx-002-3.x-IGEP_COM_AQUILA_AM335x_HARDWARE_REFERENCE_MANUAL%20-%20B6.0.pdf Hardware Manual]
 
* [http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEP_COM_AQUILA/Manuals/MAN-PR-IGEP0033-RBxx-002-3.x-IGEP_COM_AQUILA_AM335x_HARDWARE_REFERENCE_MANUAL%20-%20B6.0.pdf Hardware Manual]
  
−
===Software===
+
==Tutorials==
 +
# IGEP COM AQUILA Boot Pin-out.
 +
# [http://labs.isee.biz/index.php/Prepare_a_ready_to_boot_firmware How to prepare a ready to boot firmware.]
 +
# [[The bootloader U-Boot|U-Boot Bootloader.]]
 +
# [[Linux Kernel 4.9.y|Linux Kernel.]]
 +
# [http://labs.isee.biz/index.php/IGEP_Firmware_set-up IGEP Firmware set-up.]
 +
# [[How to prepare a bootable MicroSD Card|Boot from MicroSD Card.]]
 +
# [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]]
 +
# [http://labs.isee.biz/index.php/Update_installed_IGEP_Firmware Update Installed IGEP Firmware.]
 +
 
 +
==Firmware==
 +
===Official===
 
* [http://labs.isee.biz/index.php/IGEP_Firmware_set-up#Install_IGEP_Firmware_on_bootable_SD-card Official IGEP Firmware]
 
* [http://labs.isee.biz/index.php/IGEP_Firmware_set-up#Install_IGEP_Firmware_on_bootable_SD-card Official IGEP Firmware]
 +
 +
===Custom===
 
* [http://downloads.isee.biz/pub/relaunch/rootfs/ubuntu/xenial/ubuntu-xenial-armhf-igep-base-v0.01.tgz Ubuntu Xenial 16.04 LTS ARM Hard Float]
 
* [http://downloads.isee.biz/pub/relaunch/rootfs/ubuntu/xenial/ubuntu-xenial-armhf-igep-base-v0.01.tgz Ubuntu Xenial 16.04 LTS ARM Hard Float]
 
* [http://downloads.isee.biz/pub/relaunch/rootfs/debian/stretch/debian-stretch-armhf-igep-base-v0.01.tgz Debian Stretch ARM Hard Float]
 
* [http://downloads.isee.biz/pub/relaunch/rootfs/debian/stretch/debian-stretch-armhf-igep-base-v0.01.tgz Debian Stretch ARM Hard Float]
Line 164: Line 166:
 
* [http://downloads.isee.biz/pub/relaunch/rootfs/buildroot/skeltal/igep-buildroot-skeltal-base-v0.01.bz2 Buildroot ARM Hard Float]
 
* [http://downloads.isee.biz/pub/relaunch/rootfs/buildroot/skeltal/igep-buildroot-skeltal-base-v0.01.bz2 Buildroot ARM Hard Float]
  
−
==<span dir="auto">Getting started with IGEP COM AQUILA<br /></span>==
+
==<span dir="auto">Guides</span>==
 +
===Getting started with IGEP COM AQUILA===
 
* [[Getting started with IGEP COM AQUILA]]
 
* [[Getting started with IGEP COM AQUILA]]
  
−
==Ubuntu/Debian Guides==
+
===Ubuntu / Debian===
 
* [[How To Set Up an NFS Mount on Ubuntu 16.04]]
 
* [[How To Set Up an NFS Mount on Ubuntu 16.04]]
  
−
==Yocto Guides==
+
===Yocto===
 
* [[How to use the Yocto Project to develop Embedded Linux]]
 
* [[How to use the Yocto Project to develop Embedded Linux]]

Revision as of 10:18, 25 September 2018

SODIMM module SINGLE core ARM Cortex-A8 up to 1000 MHz

IGEP COM AQUILA.jpg


The IGEP COM AQUILA is an industrial processor module and it can be used as a computer-on-module for your product. The IGEP COM AQUILA provides a lot of features in a small size. You can build your project anywhere you want. 


Features

  
Processor

AM3354 (Standard Setup) / AM3352 / AM3358 / AM3359, by Texas Instruments
ARM Cortex-A8
NEON SIMD Coprocessor
Frequency speed up to 1000 MHz (depending on model)

3D/2D Accelerator PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (depending on model)
Memory RAM: 128 MB up to 512 MB DDR3 (Standard setup 256 MB)
FLASH: 128 MB up to 512 MB (Standard setup 128 MB)
Onboard micro-SD card socket
Ethernet

10/100 Mbps Ethernet PHY interface

USB

1 x USB 2.0 Host
1 x USB 2.0 OTG

Display

1 x Digital Video/TFT interface (24-bits)

Additional Interfaces

(Other combinations available, see Hardware Manual for more information)

1 x I2C
1 x CAN
1 x SPI
14 x GPIOs
1 x McASP/I2S (Digital Serial Audio Interface)
1 x PWM
8 x ADC
3 x UART
2 x MMC (one used into onboard micro-SD socket)
GPMC External Bus
JTAG Interface

SW Support Linux
Android
Power Supply Power Supply: 5 V
Digital I/O voltage: 3,3 V
Power Consumption Typical 1,2 W (depending on software)
Maximum 1,5 W (depending on software)
Thermal Commercial temperature: 0 ºC to +60 ºC
Industrial temperature: -40 ºC to +85 ºC
Form Factor 67,60 mm x 26,00 mm
Ka-Ro Electronics TX48 Form Factor Compatible
Humidity 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)
MTBF > 100000 hours


Options

  
Processor
  • AM3352, by Texas Instruments
  • AM3354, by Texas Instruments
  • AM3358, by Texas Instruments
  • AM3359, by Texas Instruments
    ARM Cortex-A8
    Frequency speed up to 1000 MHz
Grade
  • Commercial temperature: 0 ºC to +60 ºC
  • Industrial temperature: -40 ºC to +85 ºC
Main Memory
  • 128 MB DDR3
  • 256 MB DDR3
  • 512 MB DDR3
Flash Memory
  • No flash
  • 128 MB
  • 256 MB
  • 512 MB
Wireless
  • No WiFi/Bluetooth
  • WiFi IEEE 802.11 b/g/n (Access Point: yes)
  • WiFi IEEE 802.11 a/b/g/n (Access Point: yes)
Fast Ethernet
  • No flash
  • 128 MB
  • 256 MB
  • 512 MB
Gigabit Ethernet
  • No flash
  • 128 MB
  • 256 MB
  • 512 MB
DVI-D
  • No flash
  • 128 MB
  • 256 MB
  • 512 MB


Documentation

Tutorials

  1. IGEP COM AQUILA Boot Pin-out.
  2. How to prepare a ready to boot firmware.
  3. U-Boot Bootloader.
  4. Linux Kernel.
  5. IGEP Firmware set-up.
  6. Boot from MicroSD Card.
  7. Boot from NAND/eMMC flash.
  8. Update Installed IGEP Firmware.

Firmware

Official

Custom

Guides

Getting started with IGEP COM AQUILA

Ubuntu / Debian

Yocto

Retrieved from "http://labs.isee.biz/index.php?title=IGEP_COM_AQUILA&oldid=12131"