Difference between revisions of "Getting started with IGEP SMARC PXA2128"

From IGEP - ISEE Wiki

Jump to: navigation, search
(→‎Overview)
Line 15: Line 15:
 
* Download software
 
* Download software
 
* Burn Software in SD Card
 
* Burn Software in SD Card
−
* Connect some peripherals, including monitor and USB peripherals.
+
* Booting
−
* Boot the board.
 
  
 
{{Message/Information Message|title=Version U-boot and Kernel |message=This tutorial has been tested using version 2017.03 u-boot and Linux Kernel 4.9.81 }}
 
{{Message/Information Message|title=Version U-boot and Kernel |message=This tutorial has been tested using version 2017.03 u-boot and Linux Kernel 4.9.81 }}
Line 37: Line 36:
  
  
−
2. Burn Software  in SD Card
+
'''2. Burn Software  in SD Card'''
  
−
[[Http://labs.isee.biz/index.php/How to prepare a bootable MicroSD Card|Boot from MicroSD Card]]
+
Now we can see an image of which are the steps to boot any module.
 +
 
 +
With a general processor all start with MLO file and U-Boot.img. Also it is the same procedure for Freescale- NXP. If you want to see how to create these files follow this [index.php/The_bootloader_U-Boot link].
 +
 
 +
Next step is that once the processor is initialized,call the
 +
 
 +
linux kernel making the execution of  your operative system available.
 +
 
 +
Finally your OS runs and you can initialize the board correctly 
 +
 
 +
 
 +
<div class="center"><div class="floatnone">[[]]</div>
 +
</div>
 +
To boot from MicroSD Card follow this [[How to boot from MicroSD Card|link.]]
 +
 
 +
 
 +
'''3. Booting'''
  
  
−
3.
 
  
  

Revision as of 10:25, 4 September 2018


Overview

This is the 1/3 chapter of the Getting Started with IGEP SMARC PXA2128 Tutorial Guide. In this first chapter, we will learn:

  • Download software
  • Burn Software in SD Card
  • Booting
Information.jpg This tutorial has been tested using version 2017.03 u-boot and Linux Kernel 4.9.81

1. Download Software

U-Boot 

$ wget http://downloads.isee.biz/pub/relaunch/igep0034/bootloaders/u-boot/v2017.03/igep0034-u-boot-v2017-03.tar.bz2

Kernel 

$ wget http://downloads.isee.biz/pub/relaunch/igep0034/kernel/4.9.81/igep0034-kernel-4-9-81.tar.bz2

Rootfs 

$ wget http://downloads.isee.biz/pub/relaunch/rootfs/ubuntu/xenial/ubuntu-xenial-armhf-igep-base-no-version.tgz

Once we have downloaded the software, i'ts necessary compile linux kernel and install the modules in your Rootfs, the tutorial is in the following link:

Linux Kernel 4.9.y


2. Burn Software  in SD Card

Now we can see an image of which are the steps to boot any module.

With a general processor all start with MLO file and U-Boot.img. Also it is the same procedure for Freescale- NXP. If you want to see how to create these files follow this [index.php/The_bootloader_U-Boot link].

Next step is that once the processor is initialized,call the

linux kernel making the execution of  your operative system available.

Finally your OS runs and you can initialize the board correctly 


[[]]

To boot from MicroSD Card follow this link.


3. Booting



Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks.


under construction

Retrieved from "http://labs.isee.biz/index.php?title=Getting_started_with_IGEP_SMARC_PXA2128&oldid=11933"