Revision as of 10:03, 4 September 2018

IGEP SMARC PXA2128 Tutorial Guides

1/3 - Getting started with IGEP SMARC PXA2128 2/3 - What can I do with IGEP SMARC PXA2128 3/3 - Start developing with IGEP SMARC PXA2128 IGEP SMARC PXA2128 Product Page IGEP SMARC PXA2128 Hardware manual

Overview

This is the 1/3 chapter of the Getting Started with IGEP SMARC PXA2128 Tutorial Guide. In this first chapter, we will learn:

• Download software
• Burn Software in SD Card
• Connect some peripherals, including monitor and USB peripherals.
• Boot the board.

	This tutorial has been tested using version 2017.03 u-boot and Linux Kernel 4.9.81

1. Download Software

U-Boot

$ wget http://downloads.isee.biz/pub/relaunch/igep0034/bootloaders/u-boot/v2017.03/igep0034-u-boot-v2017-03.tar.bz2

Kernel

$ wget http://downloads.isee.biz/pub/relaunch/igep0034/kernel/4.9.81/igep0034-kernel-4-9-81.tar.bz2

Rootfs

$ wget http://downloads.isee.biz/pub/relaunch/rootfs/ubuntu/xenial/ubuntu-xenial-armhf-igep-base-no-version.tgz

Once we have downloaded the software, i'ts necessary compile linux kernel and install the modules in your Rootfs, the tutorial is in the following link:

Linux Kernel 4.9.y

2. Burn Software  in SD Card

[to prepare a bootable MicroSD Card|Boot from MicroSD Card]

3.

Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks.

under construction