Difference between revisions of "Getting started with IGEP SMARC PXA2128"
From IGEP - ISEE Wiki
| Line 34: | Line 34: | ||
Once we have downloaded the software, i'ts necessary compile linux kernel and install the modules in your Rootfs, the tutorial is in the next link: | Once we have downloaded the software, i'ts necessary compile linux kernel and install the modules in your Rootfs, the tutorial is in the next link: | ||
| − | + | - [[Linux Kernel 4.9.y|Compile Linux Kernel]] | |
Revision as of 09:57, 4 September 2018
|
|
Overview
This is the 1/3 chapter of the Getting Started with IGEP SMARC PXA2128 Tutorial Guide. In this first chapter, we will learn:
- Download software
- Burn Software in SD Card
- Connect some peripherals, including monitor and USB peripherals.
- Boot the board.
|
This tutorial has been tested using version 2017.03 u-boot and Linux Kernel 4.9.y |
1. Download Software
U-Boot
$ wget http://downloads.isee.biz/pub/relaunch/igep0034/bootloaders/u-boot/v2017.03/igep0034-u-boot-v2017-03.tar.bz2
Kernel
$ wget http://downloads.isee.biz/pub/relaunch/igep0034/kernel/4.9.81/igep0034-kernel-4-9-81.tar.bz2
Rootfs
$ wget http://downloads.isee.biz/pub/relaunch/rootfs/ubuntu/xenial/ubuntu-xenial-armhf-igep-base-no-version.tgz
Once we have downloaded the software, i'ts necessary compile linux kernel and install the modules in your Rootfs, the tutorial is in the next link:
2. Burn Software in SD Card
[to prepare a bootable MicroSD Card|Boot from MicroSD Card]
3.
Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks.
under construction
