Difference between revisions of "IGEP SMARC AM335x"
From IGEP - ISEE Wiki
(→Firmware) |
|||
| Line 122: | Line 122: | ||
==Firmware== | ==Firmware== | ||
| − | === | + | ===Tutorials=== |
| − | |||
| − | |||
| − | |||
* [[How to prepare a bootable MicroSD Card|How to boot from MicroSD Card]] | * [[How to prepare a bootable MicroSD Card|How to boot from MicroSD Card]] | ||
* [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]] | * [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]] | ||
| + | * [[The bootloader U-Boot|U-boot Bootloader]] | ||
| + | * [[Linux Kernel 4.9.y|Linux Kernel]] | ||
* [[IGEP firmware Yocto|IGEP Firmware Yocto]] | * [[IGEP firmware Yocto|IGEP Firmware Yocto]] | ||
* [[IGEP Firmware Ubuntu]] | * [[IGEP Firmware Ubuntu]] | ||
* [[IGEP Firmware Debian]] | * [[IGEP Firmware Debian]] | ||
| − | * [[ | + | |
| − | * [[ | + | ===Documentation=== |
| + | * [[AM335x]] | ||
| + | * [[Pre-installed software on IGEP Processor Boards|Pre-installed_software_on_IGEP_Processor_Boards]] | ||
| + | * [[Update the PRE-INSTALLED software image to a current release|Update_the_PRE-INSTALLED_software_image_to_a_current_release]] | ||
===Software=== | ===Software=== | ||
Revision as of 10:32, 15 May 2018
Contents
[hide]Industrial Processor AM335x Cortex-A8 Module up to 1000 MHz
IGEP SMARC AM335x Module cover an extremely wide performance range. Based on the ARM Cortex-A8 technology, they enable an efficient development of smart devices in an extremely compact, fanless design with balanced processor and graphics performance..
Features | |
|---|---|
| Processor |
AM3352 (Standard Setup) / AM3354 / AM3358 / AM3359, by Texas Instruments |
|
3D/2D Accelerator |
PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (depending on model) |
|
Memory |
RAM: 128 MB up to 512 MB DDR3 (Standard setup 256 MB) FLASH: 128 MB up to 512 MB (Standard setup 128 MB) |
|
Ethernet |
10/100 Mbps Ethernet PHY interface |
|
USB |
1 x USB 2.0 Host |
|
Display |
1 x Digital Video/TFT interface (16-bits) |
|
Wireless |
WiFi IEEE 802.11 b/g/n (Access Point: Yes) |
|
Antenna |
1 x Internal WiFi/Bluetooth antenna |
| Additional Interfaces (Other combinations available, see Hardware Manual for more information) |
2 x I2C |
|
SW Support |
Linux |
|
Power Supply |
Power Supply: From 4,5 V to 5,5 V Digital I/O voltage: 1,8 V |
|
Power Consumption |
Typical 1,2 W (depending on software) Maximum 3,5 W (depending on software) |
|
Thermal |
Industrial temperature: -40 ºC to +80 ºC Optional:Commercial temperature: 0 ºC to +60 ºC |
|
Form Factor |
82,00 mm x 50,00 mm |
|
Humidity |
93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
|
MTBF |
> 100000 hours |
Versions
| Model | Description |
|---|---|
| IGEP0034 - RA | Internal use, AM3354 processor (2016) |
| IGEP0034 - RB | AM3352 processor (2018) |
Firmware
Tutorials
- How to boot from MicroSD Card
- Boot from NAND/eMMC flash.
- U-boot Bootloader
- Linux Kernel
- IGEP Firmware Yocto
- IGEP Firmware Ubuntu
- IGEP Firmware Debian
Documentation
- AM335x
- Pre-installed_software_on_IGEP_Processor_Boards
- Update_the_PRE-INSTALLED_software_image_to_a_current_release
