Difference between revisions of "Board validation and diagnostic tools"
From IGEP - ISEE Wiki
(Created page with '= How to find the Silicon Revision of your OMAP35x = Read back a 32 bit word from the CONTROL_IDCODE Register at address: 0x4830 A204 {| border="1" |- ! Silicon Revision ! 32-bi…') |
|||
Line 1: | Line 1: | ||
− | = How to find the Silicon Revision of your OMAP35x = | + | = How to find the Silicon Revision of your OMAP35x = |
− | Read back a 32 bit word from the CONTROL_IDCODE Register at address: 0x4830 A204 | + | |
+ | Read back a 32 bit word from the CONTROL_IDCODE Register at address: 0x4830 A204 | ||
{| border="1" | {| border="1" | ||
|- | |- | ||
− | ! Silicon Revision | + | ! Silicon Revision |
! 32-bit readback value | ! 32-bit readback value | ||
|- | |- | ||
− | | ES1.0 | + | | ES1.0 |
+ | | 0x0B6D 602F | ||
|- | |- | ||
− | | ES2.0 | + | | ES2.0 |
+ | | 0x1B7A E02F | ||
|- | |- | ||
− | | ES2.1 | + | | ES2.1 |
+ | | 0x2B7A E02F | ||
|- | |- | ||
− | | ES3.0 | + | | ES3.0 |
+ | | 0x3B7A E02F | ||
|- | |- | ||
− | | ES3.1 | + | | ES3.1 |
+ | | 0x4B7A E02F | ||
|} | |} | ||
− | Use the memory dump capability of u-boot: | + | Use the memory dump capability of u-boot: |
U-Boot # md 0x4830A204 1 | U-Boot # md 0x4830A204 1 | ||
4830a204: 2b7ae02f /.z+ | 4830a204: 2b7ae02f /.z+ | ||
− | From the read back value: 2b7ae02f, you can see the revision of this OMAP35x corresponds to ES2.1 | + | From the read back value: 2b7ae02f, you can see the revision of this OMAP35x corresponds to ES2.1 |
+ | |||
+ | = Power consumption = | ||
+ | |||
+ | Power measurements taken over the operating conditions specified. | ||
+ | |||
+ | {| border="1" | ||
+ | |- | ||
+ | ! Platform reference | ||
+ | ! Power-up <sup>(1)</sup> | ||
+ | ! kernel 2.6.28-3 <sup>(2)</sup> | ||
+ | |- | ||
+ | | IGEP v2 RC1 | ||
+ | | 240mA | ||
+ | | 550mA | ||
+ | |- | ||
+ | | IGEP v2 RC2 | ||
+ | | 240mA | ||
+ | | 460mA | ||
+ | |- | ||
+ | | IGEP v2 RC3 | ||
+ | | 240mA | ||
+ | | 550mA | ||
+ | |} | ||
+ | |||
+ | '''Power measurements conditions:''' | ||
+ | |||
+ | *0: Typical value when power-up with empty flash | ||
+ | *1: Typical value running kernel 2.6.28-3 and default rootfs (firmware v3.2.1-0) |
Revision as of 15:59, 2 June 2010
How to find the Silicon Revision of your OMAP35x
Read back a 32 bit word from the CONTROL_IDCODE Register at address: 0x4830 A204
Silicon Revision | 32-bit readback value |
---|---|
ES1.0 | 0x0B6D 602F |
ES2.0 | 0x1B7A E02F |
ES2.1 | 0x2B7A E02F |
ES3.0 | 0x3B7A E02F |
ES3.1 | 0x4B7A E02F |
Use the memory dump capability of u-boot:
U-Boot # md 0x4830A204 1 4830a204: 2b7ae02f /.z+
From the read back value: 2b7ae02f, you can see the revision of this OMAP35x corresponds to ES2.1
Power consumption
Power measurements taken over the operating conditions specified.
Platform reference | Power-up (1) | kernel 2.6.28-3 (2) |
---|---|---|
IGEP v2 RC1 | 240mA | 550mA |
IGEP v2 RC2 | 240mA | 460mA |
IGEP v2 RC3 | 240mA | 550mA |
Power measurements conditions:
- 0: Typical value when power-up with empty flash
- 1: Typical value running kernel 2.6.28-3 and default rootfs (firmware v3.2.1-0)