Difference between revisions of "User:Albert"
From IGEP - ISEE Wiki
Line 36: | Line 36: | ||
<br> | <br> | ||
+ | |||
+ | [[Category:Work in progress|Albert|test]] |
Revision as of 12:15, 24 November 2011
IGEP0022 article
Audio setup
The TPS65950 provides 2 gain stages which can be used to change the audio out signal amplitude. A digital gain which can be regulated by two alsa mixer settings and a analog one. Following code snippets may help you to use it.
amixer set -D hw:0 'DAC2 Analog' 50% amixer set -D hw:0 'DAC2 Digital Fine' 50% amixer set -D hw:0 'DAC2 Digital Coarse' 50%
Headset Output
Hardware access via
3.5mm standard stereo audio jack mounted on the top of the board
In order to activate headset output, following commands have to be executed on shell.
amixer set -D hw:0 'Headset' 0dB amixer set -D hw:0 'HeadsetL Mixer AudioL2' on amixer set -D hw:0 'HeadsetR Mixer AudioR2' on
Earphone Output
Hardware access via
TP606 = EAR.P TP605 = EAR.M which are on the backside of the board
In order to activate earphone output, following commands have to be executed on shell.
amixer set -D hw:0 'Earpiece' 6dB amixer set -D hw:0 'Earpiece Mixer AudioL2' on amixer set -D hw:0 'Earpiece Mixer AudioR2' on