Difference between revisions of "IGEPv2"
From IGEP - ISEE Wiki
Manel Caro (talk | contribs) |
Manel Caro (talk | contribs) |
||
| Line 75: | Line 75: | ||
|- | |- | ||
| − | | style="width: 28.6142%;"| | + | | style="width: 28.6142%;"|'''Additional Interfaces'''<br />(Other combinations available, see Hardware Manual for more information) |
| − | '''Additional Interfaces''' | ||
| − | |||
| − | <br />(Other combinations available, see Hardware Manual for more information) | ||
| − | |||
| style="width: 69.4757%;"| | | style="width: 69.4757%;"| | ||
2 x I2C<br /> 1 x MMC (No WiFi version)<br /> 1 x McBSP/I2S/SSI (Digital Serial Audio Interface)<br /> 3 x SPI<br /> 39 x GPIO (Maximum number of GPIOs)<br /> 1 x PWM<br /> 3 x UART (RS232 and RS485 interfaces available)<br /> 1 x Stereo Line Audio In mini jack<br /> 1 x Stereo Line Audio Out mini jack | 2 x I2C<br /> 1 x MMC (No WiFi version)<br /> 1 x McBSP/I2S/SSI (Digital Serial Audio Interface)<br /> 3 x SPI<br /> 39 x GPIO (Maximum number of GPIOs)<br /> 1 x PWM<br /> 3 x UART (RS232 and RS485 interfaces available)<br /> 1 x Stereo Line Audio In mini jack<br /> 1 x Stereo Line Audio Out mini jack | ||
Revision as of 09:49, 27 February 2018
Contents
Industrial Processor board SINGLE core ARM Cortex-A8 + DSP C64P up to 1000 MHz
IGEPv2 is an industrial processor board. It unleashes laptop-like performance and expandability without the bulk, expense or noise of typical desktop machines and is the perfect solution for many industrial applications or system requirements.
Features | |
| Processor |
DM3730, by Texas Instruments |
|
3D/2D Accelerator |
PowerVR SGX GPU, providing 2D/3D graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and Open VG support |
|
Video |
Video acceleration: H.264, H.263, MPEG-4, MPEG-2, JPEG, WMV9 and additional codecs. Video encoder/decoder up to 720p. |
|
Memory |
RAM: Up to 512 MB Mobile DDR (Standard setup 512 MB) Flash: Up to 512 MB (Standard setup 512 MB) Onboard micro-SD card socket |
|
Ethernet |
10/100 Mbps Ethernet PHY Interface |
|
USB |
1 x USB 2.0 Host |
|
Display |
1 x DVI-D/HDMI |
|
Image Capture Interface |
1 x CPI interface (12 bits) |
|
Wireless |
WiFi IEEE 802.11 b/g/n (Access Point: Yes) |
|
Antenna |
1 x Internal WiFi/Bluetooth antenna |
| Additional Interfaces (Other combinations available, see Hardware Manual for more information) |
2 x I2C |
|
SW Support |
Linux Android |
|
Power Supply |
Power from expansion connectors: 5 V Power from JST connector: 5 V Power from jack power: 5 V |
|
Power Consumption |
Typical 2,2 W (depending on software) Maximum 2,8 W (depending on software) |
|
Thermal |
Industrial temperature: -40 ºC to +85 ºC |
|
Form Factor |
65 mm x 95 mm |
|
Humidity |
93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
|
MTBF |
> 100000 hours |
