Difference between revisions of "IGEP COM AQUILA"
From IGEP - ISEE Wiki
Line 141: | Line 141: | ||
==Firmware== | ==Firmware== | ||
===Tutorials=== | ===Tutorials=== | ||
− | * | + | * IGEP COM AQUILA Boot Pin-out. |
− | * [[The bootloader U-Boot|U- | + | * [http://labs.isee.biz/index.php/Prepare_a_ready_to_boot_firmware How to prepare a ready to boot firmware.] |
− | * [[Linux Kernel 4.9.y|Linux Kernel]] | + | * [[The bootloader U-Boot|U-Boot Bootloader.]] |
− | * [[How to prepare a bootable MicroSD Card| | + | * [[Linux Kernel 4.9.y|Linux Kernel.]] |
+ | * [http://labs.isee.biz/index.php/IGEP_Firmware_set-up IGEP Firmware set-up.] | ||
+ | * [[How to prepare a bootable MicroSD Card|Boot from MicroSD Card.]] | ||
* [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]] | * [[How to Flash the System into the NAND/eMMC|Boot from NAND/eMMC flash.]] | ||
− | * [ | + | * [http://labs.isee.biz/index.php/Update_installed_IGEP_Firmware Update Installed IGEP Firmware.] |
− | |||
− | |||
===Documentation=== | ===Documentation=== | ||
* [[AM335x]] | * [[AM335x]] | ||
− | * [[ | + | * [http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEPv2/Manuals/IGEPv2_datasheet_20160715.pdf Datasheet] |
− | * [[ | + | * Schematic ([http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEPv2/Schematics/IGEPv2-RC_Public_Release_Schematics-2011-Mar-21.pdf RC] | RF ) |
+ | * Mechanicals | ||
+ | * Software Manual | ||
+ | * Hardware Manual ( [http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEPv2/Manuals/man-pr-igep0020-rcx-2.0-IGEPv2_hardware_reference_manual.pdf RC] | [http://downloads.isee.biz/pub/documentation/Platform_Boards/IGEPv2/Manuals/man-pr-igep0020-rfxx-4.x-IGEPv2_hardware_reference_manual.pdf RF] ) | ||
===Software=== | ===Software=== |
Revision as of 11:17, 18 September 2018
Contents
SODIMM module SINGLE core ARM Cortex-A8 up to 1000 MHz
The IGEP COM AQUILA is an industrial processor module and it can be used as a computer-on-module for your product. The IGEP COM AQUILA provides a lot of features in a small size. You can build your project anywhere you want.
Features |
|
---|---|
Processor |
AM3354 (Standard Setup) / AM3352 / AM3358 / AM3359, by Texas Instruments |
3D/2D Accelerator | PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (depending on model) |
Memory | RAM: 128 MB up to 512 MB DDR3 (Standard setup 256 MB) FLASH: 128 MB up to 512 MB (Standard setup 128 MB) Onboard micro-SD card socket |
Ethernet |
10/100 Mbps Ethernet PHY interface |
USB |
1 x USB 2.0 Host |
Display |
1 x Digital Video/TFT interface (24-bits) |
Additional Interfaces (Other combinations available, see Hardware Manual for more information) |
1 x I2C |
SW Support | Linux Android |
Power Supply | Power Supply: 5 V Digital I/O voltage: 3,3 V |
Power Consumption | Typical 1,2 W (depending on software) Maximum 1,5 W (depending on software) |
Thermal | Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC |
Form Factor | 67,60 mm x 26,00 mm Ka-Ro Electronics TX48 Form Factor Compatible |
Humidity | 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
MTBF | > 100000 hours |
Options |
|
---|---|
Processor |
|
Grade |
|
Main Memory |
|
Flash Memory |
|
Wireless |
|
Fast Ethernet |
|
Gigabit Ethernet |
|
DVI-D |
|
Firmware
Tutorials
- IGEP COM AQUILA Boot Pin-out.
- How to prepare a ready to boot firmware.
- U-Boot Bootloader.
- Linux Kernel.
- IGEP Firmware set-up.
- Boot from MicroSD Card.
- Boot from NAND/eMMC flash.
- Update Installed IGEP Firmware.
Documentation
Software
- Ubuntu Xenial 16.04 LTS ARM Hard Float
- Debian Stretch ARM Hard Float
- Yocto Pyro ARM Hard Float
- Buildroot ARM Hard Float