Difference between revisions of "IGEP COM AQUILA"
From IGEP - ISEE Wiki
(→Firmware) |
|||
Line 155: | Line 155: | ||
===Software=== | ===Software=== | ||
− | * [http://downloads.isee.biz/pub/ | + | * [http://downloads.isee.biz/pub/relaunch/rootfs/ubuntu/xenial/ubuntu-xenial-armhf-igep-base-no-version.tgz Ubuntu Xenial 16.04 LTS ARM Hard Float] |
+ | * [http://downloads.isee.biz/pub/relaunch/rootfs/debian/stretch/debian-stretch-armhf-igep-base-no-version.tgz Debian Stretch ARM Hard Float] | ||
+ | * [http://downloads.isee.biz/pub/relaunch/rootfs/yocto/pyro/minimal/igep0033hf-yocto-pyro-minimal-base-no-version.bz2 Yocto Pyro ARM Hard Float] | ||
+ | * [http://downloads.isee.biz/pub/relaunch/rootfs/buildroot/skeltal/igep-buildroot-skeltal-base-no-version.bz2 Buildroot ARM Hard Float] | ||
==<span dir="auto">Getting started with IGEP COM AQUILA<br /></span>== | ==<span dir="auto">Getting started with IGEP COM AQUILA<br /></span>== |
Revision as of 10:26, 17 September 2018
Contents
SODIMM module SINGLE core ARM Cortex-A8 up to 1000 MHz
The IGEP COM AQUILA is an industrial processor module and it can be used as a computer-on-module for your product. The IGEP COM AQUILA provides a lot of features in a small size. You can build your project anywhere you want.
Features |
|
---|---|
Processor |
AM3354 (Standard Setup) / AM3352 / AM3358 / AM3359, by Texas Instruments |
3D/2D Accelerator | PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (depending on model) |
Memory | RAM: 128 MB up to 512 MB DDR3 (Standard setup 256 MB) FLASH: 128 MB up to 512 MB (Standard setup 128 MB) Onboard micro-SD card socket |
Ethernet |
10/100 Mbps Ethernet PHY interface |
USB |
1 x USB 2.0 Host |
Display |
1 x Digital Video/TFT interface (24-bits) |
Additional Interfaces (Other combinations available, see Hardware Manual for more information) |
1 x I2C |
SW Support | Linux Android |
Power Supply | Power Supply: 5 V Digital I/O voltage: 3,3 V |
Power Consumption | Typical 1,2 W (depending on software) Maximum 1,5 W (depending on software) |
Thermal | Commercial temperature: 0 ºC to +60 ºC Industrial temperature: -40 ºC to +85 ºC |
Form Factor | 67,60 mm x 26,00 mm Ka-Ro Electronics TX48 Form Factor Compatible |
Humidity | 93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78) |
MTBF | > 100000 hours |
Options |
|
---|---|
Processor |
|
Grade |
|
Main Memory |
|
Flash Memory |
|
Wireless |
|
Fast Ethernet |
|
Gigabit Ethernet |
|
DVI-D |
|
Firmware
Tutorials
- U-boot Bootloader
- Linux Kernel
- How to boot from MicroSD Card
- Boot from NAND/eMMC flash.
- IGEP Firmware Yocto
- IGEP Firmware Ubuntu
- IGEP Firmware Debian
Documentation
- AM335x
- Pre-installed_software_on_IGEP_Processor_Boards
- Update_the_PRE-INSTALLED_software_image_to_a_current_release
Software
- Ubuntu Xenial 16.04 LTS ARM Hard Float
- Debian Stretch ARM Hard Float
- Yocto Pyro ARM Hard Float
- Buildroot ARM Hard Float