646
edits
Changes
From IGEP - ISEE Wiki
no edit summary
Where each row shows the result of each of the 5 consecutive measurements, in this particular case it was measured a fixed target at a 3.9 meters distance from the radar.
NOTE that it only takes about 9ms time to make each measurement.
NOTE also that the file names with the ADC captured data are generated but the files are not saved. They are only saved if you add the command -w
NOTE that it takes about 100ms time to make each measurement. This is more than previous example due to now the equipment has to write one file after each measurement.<br>
NOTE also that the file names with the ADC captured data are now generated and saved because we have used parameter -w. You should find the 20 generated files in "radar" directory. If you look at the contents of one of these files you will see something like this:<br>
6384.000000<br> 6260.000000<br> 6156.000000<br> 6083.000000<br> 6043.000000<br> 6036.000000<br> 6047.000000<br> 6075.000000<br> 6099.000000<br> 6107.000000<br> 6080.000000<br> 6012.000000<br> 5888.000000<br> 5711.000000<br> 5467.000000<br> 5164.000000<br> 4819.000000<br> 4443.000000<br> 4056.000000<br> 3652.000000<br> 3267.000000<br> 2903.000000<br> 2568.000000<br> 2268.000000<br> 2008.000000<br> 1787.000000<br> 1599.000000<br> 1439.000000<br> 1316.000000<br> 1215.000000<br> 1135.000000<br> 1083.000000<br> 1052.000000<br> 1048.000000<br> 1087.000000<br>
