646
edits
Changes
From IGEP - ISEE Wiki
no edit summary
<br> This feature is interesting if you want to use the web application demo as a console where you can configure the radar with different modulations and get the results prompted on the screen or saved on a text file.
For example, put in this section the next commands:
and click on "RUN" button
-T 800 means you want a modulation with 0,8ms sweep time
-m 20 means that you want to make 20 consecutive measurements
You can check a complete explanation of each parameter on the user manual of the radar.
Finally, the last column indicates the name of the captured file. IMPORTANT: This file will be generated and stored ONLY if you add the parameter -w
-w means that you want to write all the measurements on a file (there will be generated 20 files, one for each measurement, and each one with 2048 samples) <br> SECTION-3: RADAR CONTINUOUS MODE This section is used to get the same graphics as the obtained on the Home Menu icons f(t) and F(jw), but in this case we can remove the default modulation and put the parameters we want. By checking on TIME or FFT we will obtain the time domain or the frequency domain graphic.<br> For example, remove the default modulation and put: -T 1000 This will program the modulator with a 1ms modulation ramp. If you click the "RUN" button you will see in pseudo-real time the time domain or the frequency domain graph of the IF radar signal.
== What is "Files" section ==
