646
edits
Changes
From IGEP - ISEE Wiki
no edit summary
There are three sections:
=== SECTION-1: CURRENT PARAMETERS<br> ===
Clicking on "Check" icon you will get the last modulation parameters modified.<br>
<br>
=== SECTION-2: UPDATE PARAMETERS ===
You can type in this section the modulation parameters you want to change. For example, if you want to reduce the modulation bandwith to 150MHz and increase the sweep time to 5000us you should type: -W 150 -T 5000 and then click on "UPDATE" icon. Then, from now the radar is configured with these new parameters and all measurements will be done in these new conditions until a new parameter change is performed.
<br>
=== SECTION-3: LIST FILES<br> ===
You can check at any moment the data files you have saved on the radar by clicking on any of the three buttons, depending if you only want to check sample files, or FFT files or all the files.For example, if you click on "Only WAVE Files" button it will appear a list of files of the captured data similar to this:<br> [[Image:FILES_NEW.jpg]]<br>
<br>
This feature is interesting if you want to use the web application demo as a console where you can configure the radar with different modulations and get the results prompted on the screen or saved on a text file.
