646
edits
Changes
From IGEP - ISEE Wiki
no edit summary
<br>
Example 3: You want to capture 7 consecutive measurement results into a file named measure7.txt. In addition you want to use a modulation sweep time of 0,9ms and you also want to generate a file of the ADC captured data for each measurement. In order to identify your measurements you want to name them 3432112345. Then, in this case, you must prompt the next command line:
./radar -T 900 -D 34321 12345 -m 7 -w >measure7.txt<br><br>
Now you can check the measurement results in the generated measure7.txt file. You will see 7 rows with the position and speed measured.<br>
Position Speed Level Dtime filename<br> [m] +/-0.5 [Km/h] +/-3 . [ms] .<br> 4.9 -1 632 48 V58D12345A00.<br><br> 4.9 -1 630 92 V58D12345A01.<br> 4.9 -1 629 91 V58D12345A02.<br> 4.9 -0 645 92 V58D12345A03.<br><br> 4.9 1 619 91 V58D12345A04.<br> 4.9 1 587 149 V58D12345A05.<br> 4.8 -0 611 91 V58D12345A06.<br>
If you look in the "radar" directory you will find the 7 data captured files with the desired extension name: V58D12345A00.txt, V58D12345A01.txt, etc.<br> The first three digits of the file name are automatically generated depending on the modulation sweep time. You can check the user manual fore more details.
= Next Steps =