4,199
edits
Changes
From IGEP - ISEE Wiki
m
→Power up IGEP COM MODULE
== Power up IGEP COM MODULE ==
[[Image:IGEP_COM_MODULE_with_HUB.JPG|right|200px]]IGEP COM MODULE for standalone operation (without expansion boards) can be supplied using a 5V DC through USB 2.0 OTG connector. Use an USB Hub with external power supply.<br><br><br><br><br><br><br><br>
'' Boot priority: ''
IGEP COM MODULE can boot from many other devices (listed by priority):
# from USB (using expansion)
# from UART3 (using expansion)
# from a MMC/MicroSD card
# from OneNAND memory
As we haven't set any other boot device rather than the oneNAND (the IGEP COM MODULE flash memory) the system boots from it.
But, for example, if as '''the MicroSD card has an upper priority than the flash''', if you plug a MicroSD card into IGEP COM MODULE (with the right configuration on it), it will boot from the MicroSD card.
== Log into IGEP COM MODULE via USB Ethernet Gadget interface ==
