4,199
edits
Changes
From IGEP - ISEE Wiki
m
== Configure ==
First of all, adjust the IP of your PC in order to be in the right subnet of IGEP, for example: 192.168.5.10
'' Linux: ''
'''NOTE:''' You don't need to configure anything if you use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine]
If you are running Linux in your PC, open a Terminal session and set the IP of the Ethernet interface in which IGEP is connected (for example eth0):
Run the following commands:
sudo ifconfig eth0 down
sudo ifconfig eth0 192.168.5.10 up
'' Windows: ''
If you are running Windows in your PC, depending of your OS version and your configuration the steps might be slightly different:
# Click the '''Start button''' and select the '''Control Panel'''
# Go to '''Network configuration'''
# Right click the interface where IGEP is connected (for example: Local Network) and select '''Propierties'''
# Select the '''TCP/IP Internet Protocol''' configuration and click the '''Propierties button'''
# Set a static IP (192.168.5.10) and 255.255.255.0 as network submask
# Close all the dialogs
→Configure
To fix the problem edit your ~/.ssh/known_hosts and remove the line corresponding to this host.
[[Category:Ethernet]]