0
edits
Changes
From IGEP - ISEE Wiki
m
If you want to '''update your pre-installed software''':
# '''Create a MicroSD card in your host PC''' with the latest software.
# Then '''boot your IGEP Processor Board''' from that MicroSD card you have just created.
# Finally, you can write the updated software from the MicroSD to the '''flash memory''' on your IGEP device.
no edit summary
----
= Overview =
=== Firmware update ===
This article explains how to '''update the pre-installed software''' of your IGEP Processor Board to a current release. This will update to the latest available version of the pre-installed software, which consists on IGEP X-Loader, IGEP Kernel and the Poky firmware.
This tutorial will follow the following steps:
# '''Download the latest firmware''' from ISEE in a Linux PC.
# Run a script that will automatically setup and '''create a MicroSD card''' with the latest software in your host PC.
# Then '''boot your IGEP Processor Board''' from that MicroSD card you have just created.
# Finally, you can write the updated software from the MicroSD to the '''flash memory''' on your IGEP device.
{{Message/Information Message|message=If you want to run a '''different software distribution''', you can follow this article: [[How to boot from MicroSD Card]].}}
= Pre-installed software on IGEP Processor Boards =
''(for more information read the article: [[Pre-installed software on IGEP Processor Boards]] or visit the [[:Category:Software|software]] category)''
= How to create a SD-card with the latest software image =
