Changes

=A=

*'''ARM architecture''': based on 32-bits processors suitable for low power applications | [http://en.wikipedia.org/wiki/ARM]

=B=

*'''Boot partition''': is the first primary partition in the MicroSD card to boot from it, configured with the boot flag mark and formated using FAT file system| [[How to boot from MicroSD Card|Boot from MicroSD Card]]

*'''Boot device priority''': ''See Boot up sequence''

=C=

*'''Communications with IGEP devices''': you can communicate with a IGEP Processor board via Serial port, Ethernet, Wifi, USB Ethernet Gadget, etc. | [[:Category:Communications|Comunications]]

*'''Debug console''': is a mechanism for interacting with the IGEP Processor operating system [host] by typing commands in your client machine to perform specific tasks. You can communicate and open debug sessions via Serial port, SSH, etc. | [[Using serial debug port to communicate|Using serial debug port to communicate]]

=D=

*'''Developing under IGEP Technology devices''': [[Start developing under IGEP Technology]]

*'''Documentation''': many IGEP Technology devices include Features description, Hardware Manual, Schematics, Pinout or Mechanical characteristics, etc. | [http://www.iseebcn.com] (link to support area)

=E=

*'''IGEP Expansion Boards''': they expand the connectivity of the Processor Boards, making possible to add more features and peripherals | [[:Category:IGEP Expansion Boards| Expansion Boards]]

*'''Ethernet''': can be used to communicate with an IGEP Processor Board (if included) | [[Using Ethernet to communicate]]

*'''Flash your MicroSD firmware''': copy your downloaded firmware from your MicroSD to the flash| [[Update the PRE-INSTALLED software image to a current release#How to flash the latest software image|Flash your MicroSD firmware]] | [[How to run a ubifs on IGEP boards|Flash using Ubifs]]

*'''IGEP devices features''': check the main features of many IGEP Technology devices | [[:Category:Features|Features]]

=G=

*'''GIT Software Repository''': stable and under developing source code versions and sources of Kernel, Uboot, Xloader, etc. | [http://git.igep.es]

*'''GPIO''': definition | [[Peripherals Summary#GPIO|GPIO]] | [[How to use GPIOs|Use GPIO's]]

=H=

=I=

*'''IGEP Technology''': ISEE Generic Enhanced Platform that was created by ISEE in 2008 based on very small processor boards that can run many Open Source and Property Operating Systems with high performance | [http://www.iseebcn.com]

*'''ISEE''': an integration software and electronic engineering company, specialist in the embedded systems, that offers advanced devices through the application of IGEP Technology | [http://iseebcn.com]

=L=

=M=

*'''OMAP Mux Configuration''': setup the modes of the OMAP pad multiplexor for using with different peripherals (UART, DSS, GPIO, I2C, etc.) | [[Mux configuration]]

*'''MicroSD''': those IGEP Processor Boards with MicroSD card readers can boot from MicroSD by setting the right configuration, partitions and software installed on the card | [[How to boot from MicroSD Card|Boot from MicroSD Card]]

=N=

=P=

*'''IGEP Processor Boards''': boards with low-power consumption and fanless processors that have laptop performance in small and quiet systems | [[:Category:IGEP Processor Boards| Processor Boards]]

*'''Poky-Linux''': definition | [[How to get the Poky Linux distribution|Get the Poky distribution]]

=R=

*'''Root File System (rootfs)''': is the filesystem that is contained on the same partition on which the root directory is located (for example: /usr /etc /bin ...). It is necessary to set a separate partition for the rootfs when booting from a MicroSD card | [[How to boot from MicroSD Card| Boot from MicroSD Card]]

*'''Boards revisions''': definition | [[Frequently Asked Questions and Their Answers#Which IGEP board do I have?| Check board revision]]

=S=

*'''SCP''': is a network protocol which supports file transfers between hosts. You can use this protocol to directly transfer files from a host to a IGEP Processor Board via Ethernet, Wifi, USB Ethernet Gadget, etc. | [[Transfer files via SCP]]

*'''SDK tools''': definition | links

*'''SPI''': definition | [[Peripherals Summary#SPI|SPI]] | [[How to use SPI|Use SPI]]

*'''Pre-installed Software''': many IGEP Processor Boards come with a firmware provided and installed on it by ISEE | [[Pre-installed software on IGEP Processor Boards|Pre-installed software]]

*'''Software applications''': a few software applications for IGEP Technology devices | [[:Category:Software applications|Software applications]]

*'''SSH''': is a network protocol that can execute commands on a IGEP Processor Board in a Debug Console via Ethernet, Wifi, USB Ethernet Gadget, etc. | [[Using SSH to communicate|Using SSH to communicate]]

=T=

*'''TPS65950''': definition | [[TPS65950]]

*'''Transfer files between IGEP devices''': definition | [[:Category:Communications|Communications]]

=U=

*'''U-boot''': definition | [[The bootloader U-Boot|Bootloader U-Boot]]

*'''Update Software''': definition | [[Update the PRE-INSTALLED software image to a current release|Update the Pre-Installed Software image]]

=X=

=Y=

=W=

=Z=