0
edits
Changes
no edit summary
=== Which revision is my board? ===
At this moment, probably it is a IGEPv2(2010-RB. Only few premium costumers have early June): * IGEPv2-RA prototypes RC boards. have silkscreen text "IGEP0020 RC" near J800 (USB Host connector)<pre>If it is * IGEPv2-RB revision, it could see boards have silkscreen text "IGEP0020-RB1" near J800 (USB Host connector)</pre> * Only few premium costumers have early IGEPv2-RA prototypes boards.
=== Is it possible to power using USB OTG connector? ===
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 113 MBytes 94.6 Mbits/sec</pre>
=== Boot up sequence ===
# OMAP3 ROM Boot with IGEPv2 hardware configuration (sys_boot[6..0]=0110000) tries to load x-loader from ...
## USB
## UART3
## MMC1
## OneNAND
# X-loader (Flash or microSD) loads uboot
# U-boot (Flash or microSD) uses "bootcmd" environment command
# Default ISEE U-boot "bootcmd" environment (Flash) tries to load Linux kernel from...
## Network boot (Linux TFTP download + NFS rootfs export from ISEE SDK Virtual Machine)
## microSD boot
## Flash boot
# Linux kernel (Network or microSD or Flash) uses configured rootfs cmdline
# Root FS (Network or microSD or Flash or USB or RAMDISK ...)
== IGEP v2 software related questions ==