4,199
edits
Changes
From IGEP - ISEE Wiki
no edit summary
Mux options are vast, at the beginning can be difficult and tedious change some configurations. Before configure mux, use the following tips to avoid problems:
*Mux can connect multiple connectors at the same peripheral, this improper use can damage the processor. Before configure mux, revise that this peripheral is not used in other pads. See schematics or [[Connectors_SummaryConnectors Summary|connectors summary]] for more information.
*Some peripherals are only available if you place or replace some resistances. See schematics for more information.<br>
*Some connectors share multiples peripherals like OMAP, WIFI/BT combo, etc. You should disable unused peripherals to avoid interferences. For example: if you want to control WIFI module via J990 disable OMAP or if you want use [[How_to_set_up_UART2_in_J990How to set up UART2 in J990|UART2 at j990]] disable Bluetooth. See schematics or , [[Connectors_SummaryConnectors Summary|connectors summary]] or [[Mux_instructions#Disable_Peripherals|how-to disable peripherals]] for more information.
There are three ways to configure mux in IGEP Boards based in OMAP35xx and DM37xx:<br>
|}
'''(improve TP)'''
=== IGEP MODULE ===
|-
|
| J5| J7
|
|
