4,199
edits
Changes
From IGEP - ISEE Wiki
no edit summary
Mode will be 1 (uart mode)
= Second way<br> =
'''NOTE: Only configures UART2_TX(6) and UART2_RX(8). You can not use UART2_CTS(4) AND UART2_RTS(10) which are usually referred to as hardware flow control. For example you can use RS232 but not RS485 peripheral. Don't use minicom with hardware flow control enable. '''<br> Go to igep.ini file, replaced by or type this:
<pre>buddy=igep0022
buddy.modem=yes </pre>
= Third way (under construction) =
